Beretta.net

haha yep I am really laying into it.   I got the dash out, which was quite tedious work but necessary to find ALL sources of the water leak. So far I have found the passenger side wiring harness to be one spot and also the vent that leads through the firewall on the passenger side also.  The seal wa...

So a 12 second beretta is gay??? what about a mid 12 second 89 cavalier that constantly traps at approx 112-113 because of hitting the limiter before the end of the 1/4 Gay right?

Well did some more work with the GTZ today... I crossed my fingers and did a compression test... This was on a cold motor that I didn't run a little before the check like you are supposed to... BUT I got 175, 180, 180, 190... my question is with a warm engine... like you are supposed to have when ch...

Well... Today I got the heater core ALMOST out (working outside dad already left the shop when I got there) I didn't have a way to jack the car up so 2 hoses are just holding it in... I took the IDI cover off and low and behold SHINEY new exhaust cam tower and SHINEY new head... Rebuilt motor almost...

Both GTZ's



As she sits...

Well, here are some pictures of the first day of cleaning/inspecting the car for problems, fixes, etc... What I have found wrong so far is the heater core needs to be replaced... Barely any coolant in whatsoever but I didn't run it more than a minute.  I filled it with water and even though it was c...

I believe for this GTZ I will take the spoiler off and see how I like it... (for the time being atleast until it's repainted) I think the Zo4 kit minus rear spoiler looks pretty damn good.   I am getting really excited about this...  I am picking it up Saturday morning then making a quick checklist ...

Best thing is I have the solid filler rear panels to put on it... I got a spec clutch and fidanza flywheel to install in it... My GTZ currently has a 3.94FDR tranny with 15k on it... I have everything to take this car to the shop and get it up and running... I even have a complete spare quad laying ...

Behold... the 300 dollar quazar GTZ...









Need's some work but a running GTZ for 300 bucks with easy fixes???  :yeah:

Well after a few days with some interuptions I finally got the 3.94 tranny from a quad Z26 in my 91 GTZ and let me tell you if you are ever considering doing this swap save up a few extra bucks and make it your next project. You will not only have a much better gear ratio and impressive reductions i...