Beretta.net

Your tranny is screwed.  Sounds like you blew out the sprag, and if you did the tranny is most likely not rebuildable because they tend to shred the casing.  Or you burnt/seized a couple sets of clutch packs.

35-40mph will likely cause an accident on the highway.

Your engine problem could be a simple vaccuum leak, and the tranny sounds like it is either very low on fluid or your clutch packs are badly worn.  Does your tranny lock out a gear every now and then?  If it does you probably blew the sprag.

Is your amp a Kenwood, or a Alpine V12.  Because they are notorious for over loading the circuit board, when using improper/unmatched impediance.

If the sub is blown you will be able to feel it when pushing on the cone.
When the amp cuts out the bass control, is it abnormally warm to touch?

Sounds like you are somehow overloading the circuit board.  What kind of amp(make/model/channels/wattage/ect)

Talk to some custom foam applicators, they may be able to fab something up.

In order to achieve a brighter clearer image, and reduce the "ghosting effect" you will need to adjust the angle of the projector to match the contour of the specific window.  Also clear decal matting applied to the area of the window being used to project the image will enhance the foreme...

(Twitch21 @ Oct. 29 2006,10:45)QUOTEWell I've been having exhaust problems lately and I'm thinking of knocking the cat off entirely when I take it in to get repaired and throwing on straight pipes. Yes it is legal here, surprisingly so it is a good idea? Or will it cause more problems off than on? ...

The further the muffler is from the tail pipe, will increase the audible sound the exhaust produces(the louder it will become), And the more bends you have the more rasp it will have.

Hello, I have a '89 Beretta GT, and I am having problems with my digital dash Information Readout(multi-function box in lower right hand corner of cluster).  It is not showing full characters it will only show partial(e.i.: it show a b instead of 6).  And I was wondering if I just need to replace th...