Z26 Decals Photos needed

[3X00-Modified]

Can someone get me some photos of the Z26 decal with a tape measure next to it so I can get a size... OR get me the height and width of the logo so I can scale the artwork I have for the door and the bumper.

Thanks!

[SummitBalt08]

I have a set from MRZ that are the same size as factory.

Here are some pics.. My phone put some of the pictures sideways lol

Here are the door decals..




Length measured from the top line.. ends just short of 11 inches.


height of the door decals..



Uploading pics of the rear bumper decal.. they will be in the next post

[3X00-Modified]

How soon do you plan on using these?

Could you mail them to me and I can match them then sent them right back to you?

[SummitBalt08]

Rear bumper decal..



This ones easy.. the tip ends right at 7 inches.


Height..



If you need anymore pics let me know

[SummitBalt08]

These are a backup set.. even though I need just a rear bumper one made since I am getting the rear cover repainted..

But. if you need them I can ship them to you no problem to use.

[3X00-Modified]

Or let me just verify the numbers... 10 7/8" overall length, and the height is 1 1/8"

[woody90gtz]

Those are appx measurements I gave to Matthieu. The vector he used is the one I sent him that I just gave to you, Jon. If you want exact measurements you'll be better off with an OEM decal still on a car.

[3X00-Modified]

OK, still stands then... If someone can measure an OEM decal that would be great.

[SummitBalt08]

Hmm I didn't know that MRZs measurements weren't exact as OEM..

The cayenne Z is at Tyler's house and it still has all the original Z26 decals still on it. If nobody gets the pictures you need by this weekend I will definitely get them.

Sent from my EVO LTE using Tapatalk 2

[woody90gtz]

Yeah, those ones MRZ sells are exact copies of what I made for my 95Z...and I had already removed the purple from my car before doing the silver/red. I think I had someone measure their car for appx sizes but it's been so long I don't really remember.

I originally did all silver and then the silver/red later. The silver/red just looks perfect on a black car...what GM should have done from the start!

[Quad4Z26]

Heres some pics I took. They are not resized so I just linked them. Just dont laugh at my purple stickers....lol

they look original....

Front

http://i97.photobucket.com/albums/l207/ ... 182911.jpg

http://i97.photobucket.com/albums/l207/ ... 182919.jpg

Rear

http://i97.photobucket.com/albums/l207/ ... 829400.jpg

http://i97.photobucket.com/albums/l207/ ... 182952.jpg

[3X00-Modified]

They are original, can you tell me the exact numbers... hard to tell from the angle of the shots...

To me it looks like 11.75x2 on the door and it looks like the same height on the bumber but only 11" wide... Very hard to tell from those pics.

[woody90gtz]

That can't be right. The rear decals are quite a bit smaller than the door decals. I know this for a fact. Is it possible the bumper was repainted at some point and the Z26 decal on the rear is an OEM door decal?

[SummitBalt08]

He definitely has a door size decal on his rear bumper lol.

Sent from my EVO LTE using Tapatalk 2

[3X00-Modified]

Ok thats whats messed up about it... LOL