Z26 Decals Photos needed

Vent shades, black outs, things like that
User avatar
Quad4Z26
Registered User
Posts: 120
Joined: Mon Sep 05, 2011 9:43 pm

Re: Z26 Decals Photos needed

Postby Quad4Z26 » Fri Aug 16, 2013 9:52 am

Haha thats true! Didnt even notice they were the same! Well if thats not right...dont use either measurements. Im not sure if there are original, drivers side sticker is not even layed straight. Lol.

Fyi..I didnt change any stickers on the car. Thats how it came when I bought it. Obviously, car is almost 20yrs old somebody must of messed with it.


Edit: size is 2 1/8" x 11"
Last edited by Quad4Z26 on Fri Aug 16, 2013 9:59 am, edited 2 times in total.


Image
1of 896 Quad4 Z26's....now 3500 5spd swapped!

User avatar
3X00-Modified
Administrator
Posts: 10672
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Z26 Decals Photos needed

Postby 3X00-Modified » Fri Aug 16, 2013 9:53 am

They are originals I can tell that because they are printed on clear vinyl... So at least get me the size of it... that will be the door size I make.



User avatar
Cliff8928
Administrator
Posts: 1774
Joined: Wed Mar 03, 2004 10:03 pm
Location: Long Grove, IL
Has thanked: 8 times
Been thanked: 10 times
Contact:

Re: Z26 Decals Photos needed

Postby Cliff8928 » Fri Aug 16, 2013 1:25 pm

How's this? I realize my sheet wasn't long enough for the door one, but it shows the angle pretty good...

Image

Image


Cliff Scott
Image

User avatar
3X00-Modified
Administrator
Posts: 10672
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Z26 Decals Photos needed

Postby 3X00-Modified » Fri Aug 16, 2013 2:07 pm

so bumper is 7 1/4 x 1 5/16

And the door is 11 ? X 2

Whats the width of the door one? just measure it and tell me the number that works too.



User avatar
Cliff8928
Administrator
Posts: 1774
Joined: Wed Mar 03, 2004 10:03 pm
Location: Long Grove, IL
Has thanked: 8 times
Been thanked: 10 times
Contact:

Re: Z26 Decals Photos needed

Postby Cliff8928 » Fri Aug 16, 2013 2:25 pm

The top edge of the decal measures 10 5/8 including the clear border. So it looks like total width would be approximately 11 3/8".

Also, I did double check that printed sheet that I used with a ruler to verify it wasn't scaled.


Cliff Scott
Image

User avatar
3X00-Modified
Administrator
Posts: 10672
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Z26 Decals Photos needed

Postby 3X00-Modified » Fri Aug 16, 2013 2:26 pm

how wide is the clear border? safe to say tip to tip its 11 1/8?

1/8" border outline?



User avatar
Cliff8928
Administrator
Posts: 1774
Joined: Wed Mar 03, 2004 10:03 pm
Location: Long Grove, IL
Has thanked: 8 times
Been thanked: 10 times
Contact:

Re: Z26 Decals Photos needed

Postby Cliff8928 » Fri Aug 16, 2013 2:27 pm

Yeah, it looks to be about 1/16". It definitely gave them some leeway in production...


Cliff Scott
Image

User avatar
3X00-Modified
Administrator
Posts: 10672
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Z26 Decals Photos needed

Postby 3X00-Modified » Fri Aug 16, 2013 2:40 pm

2 x 11.25 for the door, then scaled down 65% gets me 1.3 x 7.3125 for the bumper.

That close enough for everyone? LOL And just do an 1/16" border on them.



User avatar
Quad4Z26
Registered User
Posts: 120
Joined: Mon Sep 05, 2011 9:43 pm

Re: Z26 Decals Photos needed

Postby Quad4Z26 » Fri Aug 16, 2013 3:41 pm

Measurements sound good.

Ill be needing a set soon, right after I send off my car for the new paint job.


Image
1of 896 Quad4 Z26's....now 3500 5spd swapped!

User avatar
woody90gtz
Registered User
Posts: 4052
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Has thanked: 4 times
Been thanked: 7 times
Contact:

Re: Z26 Decals Photos needed

Postby woody90gtz » Fri Aug 16, 2013 4:18 pm

Hey Cliff your green was printed out of registration for the rear bumper. Factory defect must be worth millions!


Image
91 "SS" 3400/5spd - EP, FFP, TCE, SPEC, DSS, S&S, OBD1, 13s? GEARHEAD dezign

User avatar
ErichZ26
Registered User
Posts: 922
Joined: Thu Apr 26, 2001 1:59 pm
Location: Chicago
Contact:

Re: Z26 Decals Photos needed

Postby ErichZ26 » Fri Aug 16, 2013 8:21 pm

why don't you buy a set? Like they are pricey?

the OEM decals have lineup marks for proper install.


Image
1990 Beretta GTZ 1995 Beretta Z26 1996 Beretta Z26

User avatar
Asylum
Registered User
Posts: 3022
Joined: Wed Mar 31, 2004 9:36 am
Location: Hamilton, Ontario, Canada
Has thanked: 5 times
Been thanked: 3 times
Contact:

Re: Z26 Decals Photos needed

Postby Asylum » Sat Aug 17, 2013 7:32 pm

Jon I am going to be with Rodney all day tomorrow at CSCS and his car (The one I bought off Jim in California) is 100% original paint, decals, everything..

I will take a dozen pics and get someone to figure out how to send them to you asap.

I even know how to work a tape measure. LOL!

It's the best "on the car pics" you might get.


Eric

Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!






'91 California Quad
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.

User avatar
3X00-Modified
Administrator
Posts: 10672
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Z26 Decals Photos needed

Postby 3X00-Modified » Mon Aug 19, 2013 8:14 am

ErichZ26 wrote:why don't you buy a set? Like they are pricey?

the OEM decals have lineup marks for proper install.


I'm gathering artwork for all the other decals so what does it hurt to have this all setup and planned out? If someone want's to buy them from GM so be it... if they have what they are looking for great... If not like many other decals then we have the ability to re-produce. Why so negative?



User avatar
3X00-Modified
Administrator
Posts: 10672
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Z26 Decals Photos needed

Postby 3X00-Modified » Tue Aug 20, 2013 10:25 am

Going to the shop today to talk over some details on the GTU stuff and Z26 stuff. I need GTZ dimensions!



User avatar
SummitBalt08
Registered User
Posts: 1062
Joined: Fri Jun 04, 2010 11:10 am
Location: Sidney, Ohio
Has thanked: 2 times
Been thanked: 3 times
Contact:

Re: Z26 Decals Photos needed

Postby SummitBalt08 » Tue Aug 20, 2013 2:32 pm

I was hoping to make it up to Tyler's over the weekend but didn't get a chance to because people backed out.

This weekend I'm going up there no matter what. If you still need the rear bumper decal dimensions I can do that.

Can't wait to get the decals made that I posted on Fb lol.

Sent from my EVO LTE using Tapatalk 2


-Shawn
Been on the Beretta Forums since '04
Image
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6

Bfests '11,'12,'14
July 2012 Bnet Calendar


Return to “Appearance Mods”

Who is online

Users browsing this forum: No registered users and 4 guests