91+ Dash swap with 88 digi cluster (update)**Installed!!!!!

Vent shades, black outs, things like that
CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

91+ Dash swap with 88 digi cluster (update)**Installed!!!!!

Post by CorvetteBeretta »

So I picked up a complete 94 interior from a base beretta paid 200 for all, everything except the carpet. The car was a single owner lady and yes the dash is MINT!! well as mint as it gets for a 20 year old car, there is a few ends that need gluing as u will see. So anyway I read a lot of s&*t about not doing the swap if you have a digital dash (which I do) and also the heater controls will not work as they should. Here is my plan.....to cut out (with a dremel) bother inner housings for the clusters and fiberglass the 88 housing onto the 94 dash then build some trim around it for the holes due to the clusters being different shapes. As of now I have the 88 cluster just sitting in and the shape is not far off but the mounting holes are. Any feed back of pointers would be helpful.

My other plan is to relocate my heater contols and use my 88 ones so they work as should, this is so I could go to a double din touch screen. Im not sure I want to go this route due to the work involved but I'm not sure what I want to do with this dash.... feedback would be good..

I have some questions.
I acquired the whole steering column also with the key. Am I able to wire it up?? I'm assuming it will bolt up but I was more concerned about the wiring.

Also what is the black box on the 94 dash that is taped to the bottom of the dash under the hvac controls?
Is the 88 an 94 fuse box the same size and mounts?

Here is the new dash stripped down.
Image
Image
Image
Image
Image
Last edited by CorvetteBeretta on Tue Mar 03, 2015 6:34 pm, edited 4 times in total.


Image
CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: 91+ Dash swap with 88 digi cluster (update)

Post by CorvetteBeretta »

Got my old dash out and started to remove the inner housing the clusters have a similar angle on the face which is good. I'll post pics after I remove the backing from the 94 dash

Image
Image
Image
Image
Image


Image
CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by CorvetteBeretta »

here it is mounted just gotta fill in the gaps! sorry the pics suck I forgot my camera!
Image
Image
Image


Image
User avatar
Asylum
Registered User
Posts: 3050
Joined: Wed Mar 31, 2004 9:36 am
Location: Hamilton, Ontario, Canada
Contact:

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by Asylum »

I swear this cluster swap has been done previously back in the Beretta Stuff Days.

I just forget who did it!

Ended up working out just fine, although they had additional door panel issues with the dash width.

Looks neat though.


Eric

Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!






'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by CorvetteBeretta »

Asylum wrote:I swear this cluster swap has been done previously back in the Beretta Stuff Days.

I just forget who did it!

Ended up working out just fine, although they had additional door panel issues with the dash width.

Looks neat though.
Thanks man I happy with the progress
Are you referring to 88 door panels with the newer dash?
I have one 94 passenger panel so far the drivers one was destroyed so I left it.


Image
User avatar
Asylum
Registered User
Posts: 3050
Joined: Wed Mar 31, 2004 9:36 am
Location: Hamilton, Ontario, Canada
Contact:

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by Asylum »

You may do well trying to find a drivers door panel.

There was an issue as I recall, but it was years ago.


Eric

Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!






'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by CorvetteBeretta »

Asylum wrote:You may do well trying to find a drivers door panel.

There was an issue as I recall, but it was years ago.
I cant find anything out here berettas are non excitant at wreakers here


Image
User avatar
themixer
Registered User
Posts: 1569
Joined: Fri Aug 14, 2009 12:13 pm
Location: Truro, Nova Scotia. Canada

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by themixer »

could you document the wiring changes that will need to be made for headlights and wipers? I do remember this on the old site this would be great information.

1988-90 door panels will fit all with a 91+ dash
the problem was taking the newer 91+ door panels and putting them on a 1988-90 car the doors will not close

http://www.beretta.net/?page_id=101


CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by CorvetteBeretta »

themixer wrote: the problem was taking the newer 91+ door panels and putting them on a 1988-90 car the doors will not close
Is this with the 88 dash or the 91+ dash swap


Image
CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by CorvetteBeretta »

I will take some better pics, I forgot my camera so those ones are shanty cell pics. Oh and yes I will document the wires...


Image
User avatar
themixer
Registered User
Posts: 1569
Joined: Fri Aug 14, 2009 12:13 pm
Location: Truro, Nova Scotia. Canada

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by themixer »

CorvetteBeretta wrote:
themixer wrote: the problem was taking the newer 91+ door panels and putting them on a 1988-90 car the doors will not close
Is this with the 88 dash or the 91+ dash swap

With the 1988-1990 dash and 91+ door panels will not fit.

91+ dash and 1988-1990 door panels will fit

So doing the 91+ dash swap, you can run any door panel you can find. I have a set of 1996 red z26 panels in ok shape if you have a hard time finding some. Send me a PM if interested.


CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by CorvetteBeretta »

Can u post a pic?


Image
User avatar
themixer
Registered User
Posts: 1569
Joined: Fri Aug 14, 2009 12:13 pm
Location: Truro, Nova Scotia. Canada

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by themixer »

yes will do tonight!


CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by CorvetteBeretta »

More progress here, I got the digital cluster controls mounted I'm actually impressed how well it fits. Sorry but they are crappy phone pics..
Image
Image
Image
Image


Image
User avatar
themixer
Registered User
Posts: 1569
Joined: Fri Aug 14, 2009 12:13 pm
Location: Truro, Nova Scotia. Canada

Re: 91+ Dash swap with 88 digi cluster (update)**mounted**

Post by themixer »

when are you doing to try and install it in the car?


Post Reply