Page 1 of 1
LED's in your headlight/wiper switches for 91+
Posted: Thu Feb 05, 2015 11:24 am
by CorvetteBeretta
I'm sure its been done but if not (or forgotten) here is what I did.
-Remove cluster cover
-Remove bulb from switch
-Remove bulb from housing (I used tweezers)
This is the donor bulb
-Remove donor bulb
-Carefully cut the ends off OEM bulb(careful they will go flying)
-Attach the OEM bulb leads to the ends of the new bulb (I bent the ends like hooks and attached them then crimped them with the tweezers)
-Insert the new bulb into the OEM socket
-Use tweezers to wrap the leads around bulb socket
final product **make sure you test it before fully reinstalling if not working 180 the bulb housing**
Re: LED's in your headlight/wiper switches for 91+
Posted: Thu Feb 05, 2015 12:22 pm
by 1988GTU
led specs (donor from? )
Re: LED's in your headlight/wiper switches for 91+
Posted: Thu Feb 05, 2015 12:36 pm
by CorvetteBeretta
This is what I bought
Lamp Modle: T3
• Lamp Socket: wedge style
• Lighting Colour: Bule&Purple&White&Pink
• Avaliable Volotage:DC 12V
• Watta: 0.2W
• Lumen:11 LM
• LED Quantity: 1 led
• Size:8mm×8mm×10mm
• Avarage time: 50,000 hours
• Package Inclued: 10 pieces T3 1 white/pink/bule/Purple led light
I bought them for my Honda and wanted to put the left overs to good use
http://www.aliexpress.com/item/10pcs-lo ... 12130.html
Re: LED's in your headlight/wiper switches for 91+
Posted: Thu Feb 05, 2015 7:45 pm
by woody90gtz
I did the same thing with these. I split & stripped the leads on the LED just before the bottom of the socket and twisted them in like the stock bulb.
http://www.ebay.com/itm/20-X-5MM-Red-LE ... 43&vxp=mtr
Re: LED's in your headlight/wiper switches for 91+
Posted: Thu Feb 05, 2015 8:11 pm
by Asylum
There are so many plug and play 194 replacement LED lights available all over the place, why would you mess with making them?
NOOB Question! No Flaming!!
Re: LED's in your headlight/wiper switches for 91+
Posted: Thu Feb 05, 2015 8:18 pm
by 3X00-Modified
These are micro bulbs not the 194 size.
Re: LED's in your headlight/wiper switches for 91+
Posted: Thu Feb 05, 2015 9:10 pm
by CorvetteBeretta
Asylum wrote:There are so many plug and play 194 replacement LED lights available all over the place, why would you mess with making them?
NOOB Question! No Flaming!!
These are not 194 they are a t3 bulb, much smaller. Im sure you could use most mini leds for this I just had left overs so I wanted to use them.
Re: LED's in your headlight/wiper switches for 91+
Posted: Thu Feb 05, 2015 9:25 pm
by CorvetteBeretta
I love these never seen this before, plus great price!! Thanks for the link
