'88/89 GT rear sway bar

Want some new struts? What brand springs to buy? How much camber to run? What brake pads? What's the best setup for your situation....
User avatar
speedygtz
Registered User
Posts: 335
Joined: Wed Jun 28, 2006 11:09 pm
Location: lehighton

'88/89 GT rear sway bar

Post by speedygtz »

nope 95 was. and it is so gehy how its set up, shocks are a pita to do compared to the earlier years... ect.. just dumb if you asked me.


the z26 is on the road!
Beretta__z26
Registered User
Posts: 57
Joined: Thu Apr 03, 2008 8:44 pm
Location: Ritzville, Washington
Contact:

'88/89 GT rear sway bar

Post by Beretta__z26 »

So my guess is that there was no soild sway bar in the 88 89 corsicas either? or did they even have sway bars?




My '90 INDY and '96 Z26
Beretta__z26
Registered User
Posts: 57
Joined: Thu Apr 03, 2008 8:44 pm
Location: Ritzville, Washington
Contact:

'88/89 GT rear sway bar

Post by Beretta__z26 »

nobody?




My '90 INDY and '96 Z26
Tempest Driver
Registered User
Posts: 13
Joined: Fri Feb 29, 2008 10:28 am
Location: West Coast, Canada

'88/89 GT rear sway bar

Post by Tempest Driver »

They did come with sway bars, or atleast my tempest did.
I have the 30mm up front, and i had the 19mm in the rear, i grabbed a 21mm off a z24 and it bolted right on to my tempest.
The corsica sway bars won't bolt on to a beretta, the angle at the end of them is different, perhaps with some modding you could make it work..
The beretta bar goes to almost a 90 degree bend where as the corsica is about 45 degrees.





Post Reply