Non-ABS master cylinder ports

Want some new struts? What brand springs to buy? How much camber to run? What brake pads? What's the best setup for your situation....
User avatar
woody90gtz
Registered User
Posts: 4032
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Has thanked: 4 times
Been thanked: 7 times
Contact:

Non-ABS master cylinder ports

Postby woody90gtz » Tue Jul 16, 2013 9:22 am

Can anyone with a pre-92 master check the ports and which line goes where? I'm replacing all the flare nuts and would like to double check the layout. I used a 94+ brake/fuel line assembly in my 91 and had to change a flare nut for it to work. Everything worked well, but I'd just like to double check that everything is correct, because now would be the time to change it in case.

Top front -
Bottom front -
Top rear -
Bottom rear -


Image
91 "SS" 3400/5spd - EP, FFP, TCE, SPEC, DSS, S&S, OBD1, 13s? GEARHEAD dezign

User avatar
Asylum
Registered User
Posts: 3022
Joined: Wed Mar 31, 2004 9:36 am
Location: Hamilton, Ontario, Canada
Has thanked: 5 times
Been thanked: 3 times
Contact:

Re: Non-ABS master cylinder ports

Postby Asylum » Tue Jul 16, 2013 9:28 am

I will check mine a little later today if no one beats me to the answer.


Eric

Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!






'91 California Quad
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.

User avatar
Asylum
Registered User
Posts: 3022
Joined: Wed Mar 31, 2004 9:36 am
Location: Hamilton, Ontario, Canada
Has thanked: 5 times
Been thanked: 3 times
Contact:

Re: Non-ABS master cylinder ports

Postby Asylum » Tue Jul 16, 2013 9:43 am

Here's what I found on V6Z24.com

Top front: Left Front
Top Rear: Right Front
Bottom Front: Right Rear
Bottom Rear: Left Rear


Eric

Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!






'91 California Quad
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.

User avatar
woody90gtz
Registered User
Posts: 4032
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Has thanked: 4 times
Been thanked: 7 times
Contact:

Re: Non-ABS master cylinder ports

Postby woody90gtz » Tue Jul 16, 2013 10:24 am

Ok, my car was right. The pattern is different from what I would have expected (front lines from the bigger ports in rear), but it works! Thanks old man.


Image
91 "SS" 3400/5spd - EP, FFP, TCE, SPEC, DSS, S&S, OBD1, 13s? GEARHEAD dezign

User avatar
Asylum
Registered User
Posts: 3022
Joined: Wed Mar 31, 2004 9:36 am
Location: Hamilton, Ontario, Canada
Has thanked: 5 times
Been thanked: 3 times
Contact:

Re: Non-ABS master cylinder ports

Postby Asylum » Tue Jul 16, 2013 10:35 am

You're right it does seem weird, so I went and looked at mine.

That is correct.


Eric

Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!






'91 California Quad
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.

stargazer7467
Registered User
Posts: 2
Joined: Fri Jan 31, 2014 8:10 am

Re: Non-ABS master cylinder ports

Postby stargazer7467 » Fri Jan 31, 2014 8:41 am

i used this pic for the abs delete on the sunfire. I used a corsica M/C iirc.
Attachments
t_hpim0238marked_213.jpeg




Return to “Suspension and Brakes”

Who is online

Users browsing this forum: No registered users and 5 guests