Z51 sway bar aftermarket bushing?

Want some new struts? What brand springs to buy? How much camber to run? What brake pads? What's the best setup for your situation....
User avatar
Slinky
Registered User
Posts: 917
Joined: Wed Jul 29, 2009 9:27 pm
Been thanked: 4 times

Re: Z51 sway bar aftermarket bushing?

Postby Slinky » Tue Jan 07, 2014 5:42 pm

Ok the one i previously ordered and sanded the bottoms down on that are to skinny are the ones in the following link
http://www.energysuspensionparts.com/pr ... od=16.5108

The next link are the ones listed for the z51 sway bar but are sloppy in the brackets and are 19mm
http://www.energysuspensionparts.com/pr ... rod=3.5169

I'm to the point now where I would pretty much almost by used rubber bushings from someone just so I don't pay an arm and a leg and I know they will fit..
Anybody got some stock ones they wanu sell??? :D

But i think i may order these to see if they fit but i doubt it..
http://www.energysuspensionparts.com/pr ... rod=9.5126


1 Of 1 Street Legal Centri S/c Beretta's In Existance

User avatar
3X00-Modified
Administrator
Posts: 10657
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Z51 sway bar aftermarket bushing?

Postby 3X00-Modified » Wed Jan 08, 2014 10:21 am

Dimensions are right on that page... don't waste the money if it doesn't measure up. 1 3/16 wide for where I'm assuming the lip would start... and a rough height of the bushing including that universal bracket is 1 3/8"

Image

ES has all of these dimensions called out for their universal bushings so if you use their catalog you should be able to find the best bushing and I think 22mm ID will be too loose on the bar.



User avatar
Slinky
Registered User
Posts: 917
Joined: Wed Jul 29, 2009 9:27 pm
Been thanked: 4 times

Re: Z51 sway bar aftermarket bushing?

Postby Slinky » Wed Jan 08, 2014 12:31 pm

I noticed that on the energy suspension sit and compaired and i felt the same way, im not going to waste any of my money, i ordered 2 new gm ones and my brackets came with one, but i am still 1 short


1 Of 1 Street Legal Centri S/c Beretta's In Existance

User avatar
1988GTU
Registered User
Posts: 2744
Joined: Sat Mar 23, 2002 1:06 pm
Location: A town up north
Has thanked: 18 times
Been thanked: 11 times

Re: Z51 sway bar aftermarket bushing?

Postby 1988GTU » Wed Jan 08, 2014 2:17 pm

Slinky wrote:Ok the one i previously ordered and sanded the bottoms down on that are to skinny are the ones in the following link
http://www.energysuspensionparts.com/pr ... od=16.5108

The next link are the ones listed for the z51 sway bar but are sloppy in the brackets and are 19mm
http://www.energysuspensionparts.com/pr ... rod=3.5169

I'm to the point now where I would pretty much almost by used rubber bushings from someone just so I don't pay an arm and a leg and I know they will fit..
Anybody got some stock ones they wanu sell??? :D

But i think i may order these to see if they fit but i doubt it..
http://www.energysuspensionparts.com/pr ... rod=9.5126


Have you looked at my links?


_________
Image
-------------

User avatar
Slinky
Registered User
Posts: 917
Joined: Wed Jul 29, 2009 9:27 pm
Been thanked: 4 times

Re: Z51 sway bar aftermarket bushing?

Postby Slinky » Wed Jan 08, 2014 2:47 pm

Yeah but im pretty much out of time, if they are "universal" like the ones i have there is a great doubt they will fit and i checked what Jon had posted and none o them have proper dims listed to fit in the brackets.. So im on the search for 1 stock bushing..


1 Of 1 Street Legal Centri S/c Beretta's In Existance


Return to “Suspension and Brakes”

Who is online

Users browsing this forum: No registered users and 4 guests