universal sway bar

Barry · Post by **Barry** » Tue Apr 17, 2012 12:01 pm

That acheiva has some cool parts on it. That looks overkill but many prefer that on FWD cars to make them rotate a little more.

I was looking into those bars for my rwd swap, my front sway bar needs to go in front of the engine not behind it like stock.

Post by **3X00-Modified** » Tue Apr 17, 2012 12:04 pm

Something I don't think many noticed is that achieva rear axle does not have holes in it like ours does... that makes a big difference in flex to start.

99GaGT3X00 · Post by **99GaGT3X00** » Tue Apr 17, 2012 12:23 pm

3X00-Modified wrote:Something I don't think many noticed is that achieva rear axle does not have holes in it like ours does... that makes a big difference in flex to start.

could always weld in gussets in between the holes. given the amount of holes someone could weld a gusset in between each hole. would probably have to notch out for the internal sway bar.

i couldn't find any good pics of the rear axle to put my thought to picture.

EDIT
it's kinda similar to what some people are doing with the rear trailing arm's on the GA.

Barry · Post by **Barry** » Tue Apr 17, 2012 1:08 pm

I think my 94 axle had no holes (z26) and my 95 base did

99GaGT3X00 · Post by **99GaGT3X00** » Tue Apr 17, 2012 1:53 pm

probably something they did when they added the internal sway bar in the axle.

could either weld gussets or box it in or a little bit of both. filling in the holes might be a waste if your going to do the other two.

weba · Post by **weba** » Tue Apr 17, 2012 2:03 pm

What holes? None of my axles have holes.

Post by **3X00-Modified** » Tue Apr 17, 2012 2:06 pm

Looks like it was changed with the spring change in 95. The images of a 94 axle has not swiss cheese... but the 95's do

Pic of beretta beam at the bottom with no spring pockets

Post by **3X00-Modified** » Tue Apr 17, 2012 2:09 pm

weba wrote:What holes? None of my axles have holes.

You don't own a 95+

SEE holes...

Weight Reduction

weba · Post by **weba** » Tue Apr 17, 2012 2:13 pm

They sure made everything worse in the last years...

Post by **3X00-Modified** » Tue Apr 17, 2012 2:18 pm

I'll still lift a tire when turning on to the road at work and thats the Addco bar and internal bar, so it's not that bad... I consider mine pretty stiff as is. the definately reinforced how the bearing was put out there though, those tubes I wonder how well they stay where they should be... Mine is a big boxed in tower for the bearing.

DTMAce · Post by **DTMAce** » Tue Apr 17, 2012 2:19 pm

No wonder the 95 years rusted so bad. LOL

Beretta.net

universal sway bar

Re: universal sway bar

Re: universal sway bar

Re: universal sway bar

Re: universal sway bar

Re: universal sway bar

Re: universal sway bar

Re: universal sway bar

Re: universal sway bar

Re: universal sway bar

Re: universal sway bar

Re: universal sway bar

Connect with your social network account