|
As to the first question, there are only three ways to do this:
1: Use the car's pump to pump the gas out. There is a pigtail under the hood to make the fuel pump run with the engine off. Just need to unhook the fuel line so the bad fuel can be pumped out. Problem with this is, it will take some time, and you will not get it all out.
2: Siphon it out, using a fuel siphoner. Problem with that is, again you will not get all the fuel out.
3: Drop the tank, pull the pump, and dump the tank out. Rinse the tank out with clean gas, rinse the pump off, and reinstall. Problem with this, is the more-work-to-do-it-properly part. Plus you have to be careful not to damage the pump, not bang it on ANYTHING, including the sides of the tank, not breaking anything taking it apart, replacing gaskets, and seals, and pump filters, tank straps, etc.
As for the wiring part, yes take a good clear picture (use plenty of light, it helps) so we can see what you have going on there.
Good luck.
_________________ Ace's 94' Z26 Restoration Project Custom LED Light Conversions Registered for BFEST 2010! Are you?
|