cam carrier gasket?

If there isn't a place for your question then put it here.
Post Reply
lefthander
Registered User
Posts: 38
Joined: Mon Oct 17, 2011 6:43 pm
Location: Milton, Wi

cam carrier gasket?

Post by lefthander »

Anyone have a part# for 2.3 intake and exhaust carrier gaskets? Or know were to find and order them? Thanks


wi_corsica
Registered User
Posts: 148
Joined: Thu Apr 26, 2012 9:09 pm
Location: WI

Re: cam carrier gasket?

Post by wi_corsica »

22531631 INT MANIF, 22531199 EXH CAM HSG CVR
i don't know if that's what you need?


88 Corsica Z51 // 90 Corsica Hatchback // 90 Beretta // 91 Corsica
User avatar
scd88ga
Registered User
Posts: 1828
Joined: Mon Jun 28, 2010 9:02 pm
Location: Wisconsin Rapids, Wisconsin
Contact:

Re: cam carrier gasket?

Post by scd88ga »

I don't know if you can order the carrier gaskets separate, but the whole upper set for either side are only like $10-$12 each and most parts stores carry them! I got mine at Advance Auto here and I have them sitting right in front of me.

Fel-Pro
(2nd Design) 1988-94
Exhaust Cam Carrier Set
Part # VS 50445 R

Fel-Pro
(2nd Design 1991-94
Intake Cam Carrier Set
Part # VS 50444 R

As you can see, it looks as though the exhaust set I have covers all years 88-94, and the intake set I have only cover 91-94, there must be another part number for the 88-90 intake set.

These sets include the both the rubber seals for the cam carrier cover, the cam carrier base gasket and both the end gaskets for each carrier.

The boxes DO have individual part numbers listed for every gasket in the set, but I know for a fact getting and of those individually would be a factory-direct special order if you can even get them that way at all!

Hope that helps ya Jody! :)


*EDIT*

Here's a pic! If you can't read the numbers, just ask! :good:

Image


'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
lefthander
Registered User
Posts: 38
Joined: Mon Oct 17, 2011 6:43 pm
Location: Milton, Wi

Re: cam carrier gasket?

Post by lefthander »

Thanks Brett. Ill have to try the numbers you gave me, because advance told me they can no longer order them for the 2.3 engines only the newer quads.


User avatar
scd88ga
Registered User
Posts: 1828
Joined: Mon Jun 28, 2010 9:02 pm
Location: Wisconsin Rapids, Wisconsin
Contact:

Re: cam carrier gasket?

Post by scd88ga »

lefthander wrote:Thanks Brett. Ill have to try the numbers you gave me, because advance told me they can no longer order them for the 2.3 engines only the newer quads.
I just bought those two months ago, they were listed on the computers there as valve cover gasket sets. $11.99 for the intake side and $9.99 for the exhaust side. If they aren't in stock already, then they are a next day item. ;)

Intake:
http://shop.advanceautoparts.com/webapp ... rm=gaskets

Exhaust:
http://shop.advanceautoparts.com/webapp ... rm=gaskets


'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Post Reply