While im doing this.....
Re: While im doing this.....
cracked upper intake. Spray that area carefully with can parts cleaner while running.
_________
-------------
-------------
-
3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: While im doing this.....
Codes popping up like that could be a ton of things... Some of the codes you see don't mean that specific item has failed... aka misfire doesn't mean JUST the ignition is bad as 1988GTU noted. You need to dig a little further and find the source of the issue.
Re: While im doing this.....
Ugh this is so lame3X00-Modified wrote:Codes popping up like that could be a ton of things... Some of the codes you see don't mean that specific item has failed... aka misfire doesn't mean JUST the ignition is bad as 1988GTU noted. You need to dig a little further and find the source of the issue.
Re: While im doing this.....
Impossible to tell where I am sitting of course, but it isn't uncommon for the P/S pump and even the alternator to make sounds similar to what you are describing. I'm not sure how much of a stretch it is to hope for a problem there... Did the shop put in different accessories, or were they able to re-use your old ones? Some years of the 3400s had very different alternators than the 3100s, for instance... A cracked manifold could solve all of your problems once fixed, and a cheap trip to the junk-yard isn't the worst thing you could be looking at here. It is also really easy to get some of the wires caught between the upper and lower manifolds during assembly 
. That could also cause your issues, especially if some of them were cut during the process, like the CTS for instance... Well, here is hoping for a cheap and simple fix.
. That could also cause your issues, especially if some of them were cut during the process, like the CTS for instance... Well, here is hoping for a cheap and simple fix.1989 SuperCharged 3800 Srs-II (First)Six-Speed GTU
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
Re: While im doing this.....
Yeah i was thinking about going to junkyard for that. I could pretty much get any 3400 right? N i think a particular 3100?
-
Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: While im doing this.....
Stick with 2000 and up, your choice on 3400 or 3100 in those years. Hell I think I have a 2000 3400 upper just sitting around if you don't find one.
keep'em flying!
Re: While im doing this.....
I have one too, '03 maybe? I don't remember, but it DOES have the newer EGR version, I also still have the '99 from the block I put into my '90 turbo. Both of mine should still have the TBs on them too. PM me if you are interested, but with shipping, a local yard will likely be cheaper for you.
1989 SuperCharged 3800 Srs-II (First)Six-Speed GTU
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
-
3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: While im doing this.....
2000+ were all the same EGR... so as long as he currently has a 2000 or newer upper intake the EGR setup he is using should bolt right on there.
And I'm guessing he has a 2000+ already because if it were a 96-99 3400 then the 96 EGR would have fit with no issues at all and he wouldn't have had to get GA stuff.
And I'm guessing he has a 2000+ already because if it were a 96-99 3400 then the 96 EGR would have fit with no issues at all and he wouldn't have had to get GA stuff.
Re: While im doing this.....
If you search on YouTube under "Beretta 3400" under the name MafiaMike727 is a short video of my motor running.. Sorry for having it upside down lol (use your phone to watch the video)