5-speeds
5-speeds
So I threw this question out there under someone else's thread, but got no response. Figured I'd try it here instead. In an attempt to find a manual transmission to mate to my 3.1 to replace the autobox, I came across a decent deal on a '95 2.2 base with a 5 speed. I pretty much need a whole donor car to ensure I have the right length axles and ECU and whatnot, otherwise finding just a transmission would be easy. What I need to know is, are any of the other 5-speeds offered in Berettas (2.2, Quad) able to be mated up to a 3.1?
I've also come across a lot more 3.1/manual Sunbirds and Cavaliers, but nobody has been able to give me an answer whether or not the axles will work or not. Any thoughts?
I've also come across a lot more 3.1/manual Sunbirds and Cavaliers, but nobody has been able to give me an answer whether or not the axles will work or not. Any thoughts?
1992 Beretta GTZ; 3.1 V6 auto (depressing, really....)
1991 Beretta GTZ; Quad4 5-spd (gone to auto heaven)
1991 Beretta GTZ; Quad4 5-spd (gone to auto heaven)
-
- Registered User
- Posts: 85
- Joined: Mon Aug 30, 2004 1:15 am
- Location: Camrose, Alberta/NS
- Contact:
5-speeds
the 2.2 had the izuzu, which won't work...I don't think a quad will either. I think any j-body set-up should work, not 100 sure though. sorry.
93 gt-diza blitz kit,17's,3400/5speed...F'in A
90 gtz-rebuilt quad,17's,fx hood/kit,91+ dash swap
90 gtz-new crate motor,med grey dash swap
-
- Registered User
- Posts: 720
- Joined: Wed Apr 25, 2001 5:39 pm
- Location: Shelbina, MO
- Contact:
5-speeds
Quad will work, but you have to swap bellhousings. Just find a getrag. You'll blow the Isuzu if you drive hard.
Rex Weatherford
92 Beretta GTZ Quad4 Turbo / 5-speed (sold)
Best 1/4 ET =  13.523 @ 105.16 mph
07 Mazda 5 Black on Black (it's slow)
92 Beretta GTZ Quad4 Turbo / 5-speed (sold)
Best 1/4 ET =  13.523 @ 105.16 mph
07 Mazda 5 Black on Black (it's slow)
5-speeds
Ok, so the Getrag is the one mated to the 3.1's I assume. Shouldn't be too tough to find there. But will the axles and the rest of the necessary hardware from a J-body match up?
1992 Beretta GTZ; 3.1 V6 auto (depressing, really....)
1991 Beretta GTZ; Quad4 5-spd (gone to auto heaven)
1991 Beretta GTZ; Quad4 5-spd (gone to auto heaven)
5-speeds
Ok, so I got in contact with Mantapart and they said the axles from a 3.1 equipped J-body will work. Also said that the transmission from a 2.2 or 3.1 would work in a swap. Apparently, the Quad uses a different bellhousing so it's transmission is not compatible in a swap.
1992 Beretta GTZ; 3.1 V6 auto (depressing, really....)
1991 Beretta GTZ; Quad4 5-spd (gone to auto heaven)
1991 Beretta GTZ; Quad4 5-spd (gone to auto heaven)