Gas door

6r8ph1X · Post by **6r8ph1X** » Thu May 24, 2007 5:50 pm

OK guys, here's one for ya. On my 96 base, the gas door, swings open when ever I make a hard left turn and I would like to fix that. There is a little metal clip that came off of something in the door area or off of the asembly but I can't figure out how to put it on or where to put it on. Can someone post pics for me of the inside of the gas cap area tword the front of the car, or tell me where it goes? Thanks a bunch for all your help.

Luckymc420 · Post by **Luckymc420** » Thu May 24, 2007 7:35 pm

This is a 1995 3.1L Base

6r8ph1X · Post by **6r8ph1X** » Thu May 24, 2007 11:31 pm

Thanks dude, You rock. That was the clippy thingy I was talkin bout. Thanks again!!!

6r8ph1X · Post by **6r8ph1X** » Mon May 28, 2007 9:59 pm

ok even though I have seen how to fix it and all, it won't stay connected to anything. Any one have any Idea how to re attach this metal retention clip thingy? or would I be better off buying a new aluminum door? I hate it flying open on left hand turns. Thanks all.

Jeff P · Post by **Jeff P** » Fri Jun 01, 2007 4:42 am

I think you need a whole new gasdoor arm unless you want to do some welding.

scott91gtz · Post by **scott91gtz** » Wed Jun 06, 2007 7:28 pm

since we're on the topic of gas doors. the hinge on my 91 gtz has also rotted off. can i just buy a new hinge from GM? anyone know a part number? or what about those new gas doors that you see on the new mustangs and stuff. could one of those be rigged up to a beretta do u think?

scott91gtz · Post by **scott91gtz** » Mon Aug 20, 2007 5:41 pm

ok so i went to a gm dealer an they wanted sumthin like $250 for just the hinge. the j/y i went to only have half rotted ones so theres not really any point in trying to use one of those. anyone know were i can get one for a better price?

6r8ph1X · Post by **6r8ph1X** » Mon Aug 20, 2007 11:33 pm

Hey Scott, what I did was just bought a new one from e-bay with a working retention clip. It cost me 30$ with shipping

davidjbaldwin · Post by **davidjbaldwin** » Wed Aug 22, 2007 10:42 am

I just fixed my gas door by going to a junk yard and getting a new assembly. It cost me $30. However, the cap was black and my Beretta is Rasberry. So, I popped off the one, using pointy nose plyers, and reinstalled it on the assembly with the Rasberry color. Just Note: if you get a used gas door assembly from the junk yard, it probably is rusted. So, I would replace the clip rather than the assembly.

Does anyone know if you could just buy the clip?

Thanks. This is my first post.

afragasr · Post by **afragasr** » Sun Dec 14, 2014 4:28 pm

So, I am in need of a gas door assembly. Where can I order one from? Not junkyards, as they are probably all rusted out. Thanks.
Armando.

Beretta.net

Gas door

Gas door

Gas door

Gas door

Gas door

Gas door

Gas door

Gas door

Gas door

Gas door

Re: Gas door

Connect with your social network account