vacume line question on 2.8

If there isn't a place for your question then put it here.
Post Reply
CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

vacume line question on 2.8

Post by CorvetteBeretta »

Does the vac line off the fuel pressure regulator go to the map sensor or the splitter that runs to the fire wall and cruise controller?
I'm assuming the map anyone know


Image
1988GTU
Registered User
Posts: 2744
Joined: Sat Mar 23, 2002 1:06 pm
Location: A town up north

Re: vacume line question on 2.8

Post by 1988GTU »

Fwir it goes to the tb up top at the plate with the pack of lines.


_________
Image
-------------
CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: vacume line question on 2.8

Post by CorvetteBeretta »

let me re word this there is 2 lines that run out the back of the plenum from the throttle body one T's off the fuel pressure regulator and one comes directly off the tb does it matter where they go? or do they have a proper destination one line goes to a splitter which t's off to cruise control and then into the firewall (for hvac) and the other goes directly to the map sensor I guess its all vacuum in the end but I didn't know if some need to go to certain places


Image
1988GTU
Registered User
Posts: 2744
Joined: Sat Mar 23, 2002 1:06 pm
Location: A town up north

Re: vacume line question on 2.8

Post by 1988GTU »

Fpr and map share based on the 3.1 (1990) that I was able to peak at. Was a P.gp tho.


_________
Image
-------------
CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: vacume line question on 2.8

Post by CorvetteBeretta »

Ok thanks man


Image
Post Reply