Page 1 of 1

setting cam and crank

Posted: Mon Feb 29, 2016 4:49 pm
by CorvetteBeretta
Where should the mark on the cam sproket point if the crank points to the 12 oclock mark on a 2.8? Please and thank you

Re: setting cam and crank

Posted: Tue Mar 01, 2016 5:51 am
by 3X00-Modified
It's a 1 to 2 ratio so the marks can be pointing at each other or they can be both pointing at the 12 o'clock position. Basically as long as they are in line at the 12 o'clock position then it will be ok.

Sent from my Nexus 5X using Tapatalk