Parts Question

If there isn't a place for your question then put it here.
1989BerettaGTUwhite
Posts: 2
Joined: Wed Jun 29, 2016 1:11 pm

Parts Question

Postby 1989BerettaGTUwhite » Thu Jun 30, 2016 1:18 pm

I own an 89 Beretta GTU and I'm in need of front end parts hood, fender, bumper support bumper cover etc. I was wondering what years of cars have interchangeable parts for this car.



User avatar
heavywoody
Global Moderator
Posts: 1848
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Has thanked: 8 times
Been thanked: 15 times
Contact:

Re: Parts Question

Postby heavywoody » Thu Jun 30, 2016 1:47 pm

Fenders never changed; if you have Z04 ground effects (GTZ/Z26) then the bracket need to be added to the fender to support the GFX.

Bumper supports are all the same with the exception of the GTZ/Z26 ones having provisions for bolting in the foglamps.

Bumper covers are the same shape, but in 91 or 92 they changed the cover to have the trim where the "2.8 MPFI" was embossed in was all one piece with the bumper.

Headlights are the same minus the rubber surrounds that were found on the early models (88 usually).

Hood latch support is the same for all years/models. Hood latch is the same as well as the bumper shocks.


Geoff
95 Z26 3400 5spd
Beretta Preservation Society - Director of Acquisitions
Image

User avatar
3X00-Modified
Administrator
Posts: 10657
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Parts Question

Postby 3X00-Modified » Thu Jun 30, 2016 2:54 pm

I thought the bumper supports all had the fog mounting locations? Because I did not change my 96's bar from when it was a base and it had the holes for them.



User avatar
heavywoody
Global Moderator
Posts: 1848
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Has thanked: 8 times
Been thanked: 15 times
Contact:

Re: Parts Question

Postby heavywoody » Thu Jun 30, 2016 2:58 pm

Earlier ones didn't have them from my understanding. I'm sure it was cheaper to keep them all with the supporting holes later in production then to carry two different SKU's.


Geoff
95 Z26 3400 5spd
Beretta Preservation Society - Director of Acquisitions
Image

User avatar
Cliff8928
Administrator
Posts: 1771
Joined: Wed Mar 03, 2004 10:03 pm
Location: Long Grove, IL
Has thanked: 8 times
Been thanked: 10 times
Contact:

Re: Parts Question

Postby Cliff8928 » Sat Jul 02, 2016 1:34 am

The older ones didn't have the holes to mount the fog lights. Later on ('90?) they added that to all of them.


Cliff Scott
Image


Return to “General Questions”

Who is online

Users browsing this forum: No registered users and 4 guests