Laser-cut plates for DIY shock tower bar - Walton NY.
- woody90gtz
- Registered User
- Posts: 4701
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Laser-cut plates for DIY shock tower bar - Walton NY.
Had some plates cut so I could make my own shock bar. Had some more made up due to the level of interest. They require drilling the holes (laser doesn't make small holes well so I undersized them) and some rounding on the edges. I got the bar stock from my local Ace for about $10 for 3ft. You will need just over 4' to do it like mine. Less if straight across.
These are it, so don't wait around. I've already sold 7 pairs of these. Not many left. $10 + 6 flat rate shipping to USA. Canada has been about $10-13. PM me for paypal info. And for Canada I need your phone number too.
The red bar in these pics is also for sale. Good deal if you don't have a welder. Bolt in and go. $20 plus actual shipping cost.
These are it, so don't wait around. I've already sold 7 pairs of these. Not many left. $10 + 6 flat rate shipping to USA. Canada has been about $10-13. PM me for paypal info. And for Canada I need your phone number too.
The red bar in these pics is also for sale. Good deal if you don't have a welder. Bolt in and go. $20 plus actual shipping cost.
Last edited by woody90gtz on Wed Apr 10, 2013 2:33 pm, edited 2 times in total.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
-
- Registered User
- Posts: 108
- Joined: Wed Nov 03, 2010 9:46 pm
- Location: Billings,MT
Re: Laser-cut plates for DIY shock tower bar
I would love to have one like that, then my L7 would fit under it an still and have space in the trunk. I might be interested after I talk to my welder. Would you be interested in making another possibly though?
- woody90gtz
- Registered User
- Posts: 4701
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Laser-cut plates for DIY shock tower bar
Not really, unless you wanted to pay way too much for it. I got enough stuff on my to-do list. haha
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
Re: Laser-cut plates for DIY shock tower bar
i like that magnet strip you got there.. gives me an idea. lol
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
-
- Registered User
- Posts: 108
- Joined: Wed Nov 03, 2010 9:46 pm
- Location: Billings,MT
Re: Laser-cut plates for DIY shock tower bar
It depends on what way to much is haha? Because eithier way I have to pay someone to do it, shipping is what might suck.
Re: Laser-cut plates for DIY shock tower bar - Walton NY.
I already have a set.
Thanks again!
Thanks again!
Mike R.
- 99 Jeep Cherokee - 3" RC lift, 31x10.5s
- 06 Cobalt SS/SC - owns my soul/bank account
- 99 Jeep Cherokee - 3" RC lift, 31x10.5s
- 06 Cobalt SS/SC - owns my soul/bank account
- woody90gtz
- Registered User
- Posts: 4701
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Laser-cut plates for DIY shock tower bar - Walton NY.
Updated listing.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- #1berettaman1991gtz
- Registered User
- Posts: 24
- Joined: Thu May 13, 2010 12:26 pm
Re: Laser-cut plates for DIY shock tower bar - Walton NY.
I would like to buy a set! if you still have a set pm your paypal and I will send you payment for a set!woody90gtz wrote:Updated listing.
- #1berettaman1991gtz
- Registered User
- Posts: 24
- Joined: Thu May 13, 2010 12:26 pm
Re: Laser-cut plates for DIY shock tower bar - Walton NY.
woody90gtz I'm not sure if you checked your paypal but I paypaled the money to you for a set of brackets.
- woody90gtz
- Registered User
- Posts: 4701
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Laser-cut plates for DIY shock tower bar - Walton NY.
Yup, you should have them any day.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- woody90gtz
- Registered User
- Posts: 4701
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Laser-cut plates for DIY shock tower bar - Walton NY.
1 pair left.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
- daguse5853z
- Registered User
- Posts: 268
- Joined: Sun Feb 12, 2006 7:35 pm
- Location: Central, PA
Re: Laser-cut plates for DIY shock tower bar - Walton NY.
Do you still have a set?
1989 Beretta Base 2.8
- woody90gtz
- Registered User
- Posts: 4701
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Laser-cut plates for DIY shock tower bar - Walton NY.
I think I do actually. Had deadbeat. I'll check to make sure.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube