MI 49725 - 1995 Black Base GONE BUT SOME PARTS ARE LEFT!
MI 49725 - 1995 Black Base GONE BUT SOME PARTS ARE LEFT!
I had this listed previously on here, but this has to be parted and gone by June. SO.
First off, here is a video of the current condition of the vehicle:
http://youtu.be/SxCe3dVpzuk
This has been owned by at least 2 board members including myself. Has been known as "Black Beauty" and lately the "Bambie Killer". This has a black exterior with the red burgandy/maroon/whatever it is color interior.
Why its being parted:
Rust problems.
Engine is knocking.
EVERYTHING on the car that you see in the video above is up for grabs except:
Wheels.
Alternator.
Battery.
Radiator.
Door Handles.
Pass mirror.
Coolant bypass line (lower)
Rear Amp. (but not the speakers or the head unit)
These items above are sold, or being kept by me.
Here is the deal. ALL REQUESTS MUST BE MADE IN THE THREAD. I have a hard enough time with my current workload to be following 3 different locations for part requests, so if it isn't made here IN THE THREAD, it may go ignored or missed. I will accept PMs, if its something you want to ask for but don't want others to know you want it.
Essentially, you ask about the part you want, I can take a picture if you need one and I will throw out a price including shipping, then you can say yes or no or counter offer. I'm flexible and will try to be reasonable.
If someone wants the whole car, by all means ask. $300 bucks will take it, but you have to come after it.
OK. Pictures?
I have a thread FULL of them too. Hit the link for the 1995 base in my signature below, but I will be putting up some new pictures very soon. Currently up north.
List of specific interests:
Probably a few other things. I would even pull out the sunroof if someone wanted it.
PENDING PARTS:
SOLD PARTS:
Questions, please ask.
First off, here is a video of the current condition of the vehicle:
http://youtu.be/SxCe3dVpzuk
This has been owned by at least 2 board members including myself. Has been known as "Black Beauty" and lately the "Bambie Killer". This has a black exterior with the red burgandy/maroon/whatever it is color interior.
Why its being parted:
Rust problems.
Engine is knocking.
EVERYTHING on the car that you see in the video above is up for grabs except:
Wheels.
Alternator.
Battery.
Radiator.
Door Handles.
Pass mirror.
Coolant bypass line (lower)
Rear Amp. (but not the speakers or the head unit)
These items above are sold, or being kept by me.
Here is the deal. ALL REQUESTS MUST BE MADE IN THE THREAD. I have a hard enough time with my current workload to be following 3 different locations for part requests, so if it isn't made here IN THE THREAD, it may go ignored or missed. I will accept PMs, if its something you want to ask for but don't want others to know you want it.
Essentially, you ask about the part you want, I can take a picture if you need one and I will throw out a price including shipping, then you can say yes or no or counter offer. I'm flexible and will try to be reasonable.
If someone wants the whole car, by all means ask. $300 bucks will take it, but you have to come after it.
OK. Pictures?
I have a thread FULL of them too. Hit the link for the 1995 base in my signature below, but I will be putting up some new pictures very soon. Currently up north.
List of specific interests:
- LED Deck mounted third brake. Can be installed into any color of the light no modifications required, designed for OEM install. $25 bucks shipped.
Trangenzic(sp?) CAI. I have all the parts, so you can have it for... $50 shipped. Needs a new filter is all. I have it setup for WAI right now, but it can be ran either way.
Probably a few other things. I would even pull out the sunroof if someone wanted it.
PENDING PARTS:
SOLD PARTS:
- Passenger side mirror
Both door handles
Rear tail assembly and harness
Old spoiler
Coolant bypass line (lower)
Passenger cup holder/vents
Center console (radio/climate control) outer trim bezel
- Spoiler.
Rear tail lights.
Questions, please ask.
Last edited by DTMAce on Thu Jun 06, 2013 6:21 pm, edited 2 times in total.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Re: MI 49725 - 1995 Black Base being parted out.
Interested in the cup holder/vent in the dash...what condition is it in?
1of 896 Quad4 Z26's....now 3500 5spd swapped!-sold
'14 C7 Z51 7SPD
Re: MI 49725 - 1995 Black Base being parted out.
It's not broken, at best it needs a cleaning. $20 bucks shipped. Pics:
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Re: MI 49725 - 1995 Black Base being parted out.
Ill take it. PM me your PayPal.
1of 896 Quad4 Z26's....now 3500 5spd swapped!-sold
'14 C7 Z51 7SPD
-
- Registered User
- Posts: 740
- Joined: Mon Jan 17, 2011 6:48 pm
- Location: Meadville, PA
- Contact:
Re: MI 49725 - 1995 Black Base being parted out.
That car is nice why would you part it out
1990 Beretta GTZ Quad,226 cams, 3.94 W-41 trans
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
Re: MI 49725 - 1995 Black Base being parted out.
Done and thanks.Quad4Z26 wrote:Ill take it. PM me your PayPal.
Apparently you missed the details. Review the thread linked below in my signature about the 95 base. Essentially it has serious under body rot and a blown engine with nearly 300 thousand miles on the car.1990BerettaGTZ2.3L wrote:That car is nice why would you part it out
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
- Travelor
- Global Moderator
- Posts: 508
- Joined: Fri Jan 25, 2008 10:15 pm
- Location: Neenah, WI
- Contact:
Re: MI 49725 - 1995 Black Base being parted out.
What part of the motor is blown? upper or lower?
What I want off the engine would prob be too much trouble to snag sadly.
What I want off the engine would prob be too much trouble to snag sadly.
1988 GTU
1990 GTZ
Beretta Preservation Society Chairman
"Have you painted your car in a parking lot today?"
1990 GTZ
Beretta Preservation Society Chairman
"Have you painted your car in a parking lot today?"
Re: MI 49725 - 1995 Black Base being parted out.
We are assuming something bottom end. Here is a video I did of the engine after it broke:
http://www.youtube.com/watch?v=v3kNY8FywXs
What part are you looking for, just curious.
http://www.youtube.com/watch?v=v3kNY8FywXs
What part are you looking for, just curious.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
- Travelor
- Global Moderator
- Posts: 508
- Joined: Fri Jan 25, 2008 10:15 pm
- Location: Neenah, WI
- Contact:
Re: MI 49725 - 1995 Black Base being parted out.
94-95 3100 roller rockers work in a 3.1 mpfi motor, slight addition of 2-3hp lol
1988 GTU
1990 GTZ
Beretta Preservation Society Chairman
"Have you painted your car in a parking lot today?"
1990 GTZ
Beretta Preservation Society Chairman
"Have you painted your car in a parking lot today?"
Re: MI 49725 - 1995 Black Base being parted out.
That shouldn't be hard. I have already pulled the valve covers off. lol
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
- Travelor
- Global Moderator
- Posts: 508
- Joined: Fri Jan 25, 2008 10:15 pm
- Location: Neenah, WI
- Contact:
Re: MI 49725 - 1995 Black Base being parted out.
You said its an all original motor, correct? LOL, not sure about putting those in the turbo..
See this thread for more info. http://www.tgpforums.com/index.php?topic=3564.0
See this thread for more info. http://www.tgpforums.com/index.php?topic=3564.0
1988 GTU
1990 GTZ
Beretta Preservation Society Chairman
"Have you painted your car in a parking lot today?"
1990 GTZ
Beretta Preservation Society Chairman
"Have you painted your car in a parking lot today?"
- SummitBalt08
- Registered User
- Posts: 1062
- Joined: Fri Jun 04, 2010 11:10 am
- Location: Sidney, Ohio
- Contact:
Re: MI 49725 - 1995 Black Base being parted out.
Are you parting or selling the Aqua Z?
Sent from my EVO LTE using Tapatalk 2
Sent from my EVO LTE using Tapatalk 2
-Shawn
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Re: MI 49725 - 1995 Black Base being parted out.
Travelor wrote:You said its an all original motor, correct? LOL, not sure about putting those in the turbo..
See this thread for more info. http://www.tgpforums.com/index.php?topic=3564.0
Well, its totally up to you of course. You just need what's listed on that link?
Just be clear what you want, if you want them. Not sure what to charge for them, but how's $30 bucks shipped sound? If needed, just clarify exactly what I need to pull, how you want them pulled, kept together, whatever. I'm assuming that this doesn't seem too hard to do. Will I need to pull the lower intake to get everything? Thanks!You will need to get the pushrod guide plates from the 94-95 3100 along w/ the rocker arms... also take the pivot balls w/ the rockers, but inspect them for any gouging, etc. beforehand.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Re: MI 49725 - 1995 Black Base being parted out.
Not just yet. May put it up for sale first, if no takers then its getting parted out. Started it up and moved it today though, so it does sort of run still. IF someone would offer to take it for a grand or less (hell make me an offer), they could have it as is, I will even throw in the fairly new radiator from the base (since it needs one anyway as the one I bought from Cack failed, due to a seam not being crimped correctly). But it will need towed or trailered. Engine won't run well enough to pull itself reliably down the road, and the tires are pretty much done.SummitBalt08 wrote:Are you parting or selling the Aqua Z?
Sent from my EVO LTE using Tapatalk 2
Anyway, lets get back on topic. More about the Z will be posted soon enough.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
-
- Registered User
- Posts: 740
- Joined: Mon Jan 17, 2011 6:48 pm
- Location: Meadville, PA
- Contact:
Re: MI 49725 - 1995 Black Base being parted out.
How bad is the rot on the black car, and why you selling your z ace
1990 Beretta GTZ Quad,226 cams, 3.94 W-41 trans
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan