Page 4 of 4

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Posted: Tue May 05, 2015 9:08 pm
by SuzukiGhostRider
Posting pics of the remaining gas door assembly and clear HVAC knobs in new sale posts.

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Posted: Tue May 12, 2015 7:50 pm
by Money pit Beretta
Mike there is something I need and forget what it's called. There are two vacuum diaphragms that are connected together and activate the upper blend door. It is on the passenger side next to the glove box. Ok, Nalley GMC calls them actuators and doesn't carry them.
In warm weather everything seems to work right, when it's cold it gets stuck when going to heat(floor). Got to use defrost most of the time. Do hear a leaking sound(hiss) for a short amount of time(longer than normal). Guess I could use all the lines on the passenger side if that is ok.

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Posted: Thu May 14, 2015 2:02 am
by SuzukiGhostRider
Sure not a problem MPB. I know exactly what you're referring to.

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Posted: Thu May 14, 2015 7:30 am
by Money pit Beretta
Cool, thanks! Still thinking about what I can use. Rear deck carpet any good?

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Posted: Thu May 14, 2015 10:08 am
by SuzukiGhostRider
Nope that's gone.

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Posted: Fri May 15, 2015 7:19 am
by Money pit Beretta
Damn, mine is junk. Need to look into the PS pump(if they are the same for the 3100). Would like to have something that doesn't growl and moan all the time(shop didn't bleed the new one, I did too late to save it).

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Posted: Wed May 20, 2015 7:39 am
by Money pit Beretta
They do not have the same part number on Rock Auto.
Any way that you can check the sway bar size? I have a 28mm on the car(don't need another at this time).

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Posted: Wed May 20, 2015 8:04 am
by Asylum
Money pit Beretta wrote:Damn, mine is junk. Need to look into the PS pump(if they are the same for the 3100). Would like to have something that doesn't growl and moan all the time(shop didn't bleed the new one, I did too late to save it).
Lucas Power Steering Stop Leak is an amazing lubricant and will stop the shutter and moan, even if you don't have a leak.

It one of those additives that actually work!

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Posted: Wed May 20, 2015 1:10 pm
by SuzukiGhostRider
Bar is definitely 32mm or 36mm. I measured it a few years back. Car is a true z51 GT so it has the correct parts.

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Posted: Wed May 20, 2015 7:34 pm
by Money pit Beretta
Damn a 36mm is huge! 32mm is more of what I'm looking for.

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Posted: Wed Jul 22, 2015 3:47 pm
by whiteretta
I'm surprised you haven't sold the big front bar yet! If it's a Z51 package, it'll be that 32mm you're looking for Money Pit!

Re: Beretta GT ***** NOW BEING PARTED OUT!*****

Posted: Wed Jul 22, 2015 7:54 pm
by Money pit Beretta
Great to know! That thing has been sold to me.