Beretta.net

So here is my baby! Sad to let her go but after being in storage the better part of 15 years off and on, I need t to go to someone who will finish it. The good- get it inspected and drive it!! It's ready to run and it starts every time I turn the key! I'll be going over seas again soon and want it to go to someone who will finish it. It needs body work and paint! After that what ever you want to do to it.

The goodies!
Bilmar Block port and polish copper gaskets and its running a really high compression ratio for N/A only do not put a turbo on this car!
Limited skip trans
4 wheel disk breaks no shitty hub breaks
Complete air ride system raise lower front/back seperatly
Sparco rims! 17s
Complete GFX kit last one made! They will not make another
LED Tailligts
E36 Headlights (not currently on it)
Custom strut braces.
Custom back seats, never got around to the front.
Black interior besides doors
95 doors Corsica dash and etc

So much to list- still have the koni adjustables for it too!

I've got 20 years and 15-20k in the car

2500.00 OBO - without the JL audio sound system
5k with the JL Audio Sound System- 2x10W7, JL 6x9s, JL Component set, JL 500.4 amp (I think it's 500.4) JL 100.1 for the 10s and a pioneer head unit.

Im in Maryland you'll have to come get it and you can drive it home no need to tow it.

Message me for more details and I hope to get pics soon!

Sorry JL 1000.1 for the subs. I'm typing this on my phone so expect spelling mistakes.

Pictures ?

Willing to part with konis if so please lmk

Only have the front koni I believe the rear are still in use. I'll have to check my parts box but I k ow the rear konis are still on the car the bags just replaced the springs.

I'll put pics up as soon as I can

Here is the Car i have to go take pictures of the inside and air ride setup

Couple more:

I've never seen a Corsica dash in a Beretta before, I'm curious how the style difference will look.
Is the body not finished or is that the theme of the car? smoked black/red?

Body work was never finished. Chose Corsica dash because it was black. When I got it it looked new but now has a good 10 years on the dash. I'll get some pics of the interior soon.

Euroboni kit, or however its spelled. Only ever seen 1 other. Have any pics or documentation on the motor?

Sorry never kept any Docs on the engine as i never thought i would sell the car. The body kit was the last one at the factory, they would not part it out so i bought the entire kit you wont see this kit again except on cars that have it. Ill see if i can dig up some stuff on the engine or anything else ive done to it.

So after going through some files i made a few mistakes on my first post Particularly the Bilmar Block,It has a Bilmar Chip in it, however for the enthusiast: It has the 086 ported and polished head and was milled .035 to bump compression to 11:1. Block and components were from a road racing team that ran Oldsmobiles back in early 90s. Cams are the W41 and chip was from Bilmar to optimize everything. Tranny has an LSD gear style design (no clutch packs). Tranny itself was from a 94 Achieva, so it has the 3.94:1 FD. It has the internal slave compared to external slave, so clutch pedal and hydraulics had the be changed. Flywheel is 8 lbs compared to 11 lb original. Front and rear brakes have been upgraded, too. Rear breaks are disc from the old fierro's

The body kit was resold by erebuni, but it's actually an Aeroform GFX kit.

There you go it was the Aeroform GFX kit, couldnt remember the name of it. I do however remember calling them when i was in Afghanistan, and buying the last complete kit they had in stock.