Polished Tinted Rear Filler Panels!
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Polished Tinted Rear Filler Panels!
I have a set of show quality upper and lower tinted filler panel set for sale that were hand/machine polished by yours truly and are pretty damn sexy! I don't have the actual picture of them because they aren't done yet, but they will be done very soon! Below is a picture of another set of polished tinted fillers on my own car (with NEW reflective filler stripes installed)! Also below is a picture of 1 of the 2 taillights I polished and sold to a member here, (SummitBalt08) and he can attest to the quality of my work (I've been polishing plastics and metals for 10+ years). I'm open to offers! Thanks
Why not a couple more examples just for the hell of it! Here are some before and after shots of some headlights for an 2004 Toyota Tundra I did this past Winter.
A pair of headlight lenses from a 98 Eclipse... (These were TOAST as you can see)!
Why not a couple more examples just for the hell of it! Here are some before and after shots of some headlights for an 2004 Toyota Tundra I did this past Winter.
A pair of headlight lenses from a 98 Eclipse... (These were TOAST as you can see)!
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: Polished Tinted Rear Filler Panels!
Thanks! It's a little more involved then the As Seen On TV kits, lol Yeah, those don't work!Money pit Beretta wrote:Damn nice work there!
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
-
- Registered User
- Posts: 325
- Joined: Fri Dec 17, 2010 10:35 am
- Location: IN
- Contact:
Re: Polished Tinted Rear Filler Panels!
wanna do a pair of beretta headlights? as in like get a pair outta the jy do them and i pay for them?
"Berettas are like a sickness...and it's incurable." quoted from woody90gtz
96 z26, 3500 swap, currently awaiting Holset HX35 ,also 96 beretta, 3400 swap, rebuilt trans, 15.2 choked up with 3100 older uim & lim.
96 z26, 3500 swap, currently awaiting Holset HX35 ,also 96 beretta, 3400 swap, rebuilt trans, 15.2 choked up with 3100 older uim & lim.
- SummitBalt08
- Registered User
- Posts: 1062
- Joined: Fri Jun 04, 2010 11:10 am
- Location: Sidney, Ohio
- Contact:
Re: Polished Tinted Rear Filler Panels!
The work Brett does with polishing cannot be beat! The taillights look even better in person!
Here's a close up of the same taillights Brett polished out after I swapped Euro lenses in them for the Quad Z26!
Here's a close up of the same taillights Brett polished out after I swapped Euro lenses in them for the Quad Z26!
-Shawn
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Re: Polished Tinted Rear Filler Panels!
If you have a set of fillers and taillights ill buy them all together.
92 3.1 manual base 190k Daily
93 3.1 auto base 275k RIP 'Joan'
73 Yamaha RD250 moth balled
CPL, USMC, Veteran/2111
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: Polished Tinted Rear Filler Panels!
I have been looking for months and buy good taillights whenever I find them, but I am currently out of crack-free tails... I would like to replace my own passenger side tail with a better one, but so far have found nothing. As soon as I find another good set, they will be polished and put up for sale! So for now I only have fillers. The plan is to polish another tinted set after these ones are done, and then I'll be doing a clear set.keiffith wrote:If you have a set of fillers and taillights ill buy them all together.
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: Polished Tinted Rear Filler Panels!
If you find a clear upper filler that is crack free, I'd buy a polished one off you. Hell, crack free tail light lenses too. And that steering wheel if you find one (it can be any color, I've got a horn button now).
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
- ShaneLT(ShaneZ26)
- Registered User
- Posts: 504
- Joined: Sun Aug 15, 2010 12:27 pm
- Location: Leamington, Ontario
- daguse5853z
- Registered User
- Posts: 268
- Joined: Sun Feb 12, 2006 7:35 pm
- Location: Central, PA
Re: Polished Tinted Rear Filler Panels!
I'd bet maybe a industrial polisher found in machine shops? They def look hella sexy tho!
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: Polished Tinted Rear Filler Panels!
Noted! I'll get back at ya shortly!heavywoody wrote:If you find a clear upper filler that is crack free, I'd buy a polished one off you. Hell, crack free tail light lenses too. And that steering wheel if you find one (it can be any color, I've got a horn button now).
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: Polished Tinted Rear Filler Panels!
Shanez26 wrote:Is there a how to anywhere to do that? That looks amazing!
I do it mostly by hand with different compounds and wet sanding and only use a buffer for hard to get areas and the final polish. Plastic can be tricky to work with, you need patience because it's really easy to press too hard or go to fast no matter if you're working with power tools or by hand. Practice makes perfect!daguse5853z wrote:I'd bet maybe a industrial polisher found in machine shops? They def look hella sexy tho!
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724