Parting red 1992 GTZ (Victoria, BC)
- 92turbogtz
- Registered User
- Posts: 16
- Joined: Sun Oct 29, 2006 1:50 am
- Location: Victoria, BC
Parting red 1992 GTZ (Victoria, BC)
Parting out red 1992 GTZ located in Victoria, BC Canada. V8Y 3E8
Complete factory ground effects: $250
Includes front and rear bumpers with clear side markers, side skirts plus all brackets. It's in good shape with scrapes and scuffs. Front bumper has a small crack.
Left and right grey door panels: $50 per panel.
Excellent condition.
Left and right doors with tinted power windows: $150 each. No rust. Has some dings and there are holes along bottom from the side skirt brackets.
Hood and trunk: $100 each No dents or rust. Hood has a lot of pits in paint.
Left and right tail lights: $50 for pair.
Left and right steering knuckles and brake calipers: $100
Spec Stage 3 clutch & pressure plate: $200 Never used, a bit of surface rust on pressure plate.
Possibly for sale: Aluminum flywheel (not sure of brand, Spec?) for 2.3l Quad4. Price not set yet.
Coming up for sale soon: price not set
2.3l Quad 4 engine built for boost with 5000km on complete rebuild.
- 7.5:1 JE forged pistons
- stock shotpeened rods
- ARP head bolts and rod bolts
- O-ringed block
- 955 heads with extensive porting
- balanced
Turbo assembly fitted for a Beretta includes:
- rebuilt Garrett TO4 turbocharger (can't remember trim at moment)
- Turbonetics Deltagate wastegate
- DSM 1G blow off valve
- custom built stainless turbo manifold
- 2.5in. stainless downpipe
- complete custom 3in exhaust system includes Dynomax Race Bullet muffler and Dynomax Super Turbo muffler
- 2in. charge pipes
- 4in. (I think) cold air intake
- Mezeire 55gph electric water pump (rebuilt)
Complete factory ground effects: $250
Includes front and rear bumpers with clear side markers, side skirts plus all brackets. It's in good shape with scrapes and scuffs. Front bumper has a small crack.
Left and right grey door panels: $50 per panel.
Excellent condition.
Left and right doors with tinted power windows: $150 each. No rust. Has some dings and there are holes along bottom from the side skirt brackets.
Hood and trunk: $100 each No dents or rust. Hood has a lot of pits in paint.
Left and right tail lights: $50 for pair.
Left and right steering knuckles and brake calipers: $100
Spec Stage 3 clutch & pressure plate: $200 Never used, a bit of surface rust on pressure plate.
Possibly for sale: Aluminum flywheel (not sure of brand, Spec?) for 2.3l Quad4. Price not set yet.
Coming up for sale soon: price not set
2.3l Quad 4 engine built for boost with 5000km on complete rebuild.
- 7.5:1 JE forged pistons
- stock shotpeened rods
- ARP head bolts and rod bolts
- O-ringed block
- 955 heads with extensive porting
- balanced
Turbo assembly fitted for a Beretta includes:
- rebuilt Garrett TO4 turbocharger (can't remember trim at moment)
- Turbonetics Deltagate wastegate
- DSM 1G blow off valve
- custom built stainless turbo manifold
- 2.5in. stainless downpipe
- complete custom 3in exhaust system includes Dynomax Race Bullet muffler and Dynomax Super Turbo muffler
- 2in. charge pipes
- 4in. (I think) cold air intake
- Mezeire 55gph electric water pump (rebuilt)
Re: Parting red 1992 GTZ (Victoria, BC)
Interested in selling the spoiler brake light by itself? Doesn't have to work, so long as the red portion of the lens is not broken.
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Re: Parting red 1992 GTZ (Victoria, BC)
why are you parting out my dream car???
1991 beretta GTZ- 2.3l w41 cams, ported 086 head with a 3 angle valve job, fidanza flywheel with exedy racing clutch, 3.94fdr from and scx, so much more..
- 92turbogtz
- Registered User
- Posts: 16
- Joined: Sun Oct 29, 2006 1:50 am
- Location: Victoria, BC
Re: Parting red 1992 GTZ (Victoria, BC)
To make an extremely long story short, I bought a white 92 GTZ in 1995 that was turbocharged by the original owner. It was basically jinxed and I had nothing but problems with it. Blew the head gasket, then blew the motor. Rebuilt the motor with better parts then other things would go wrong with it.speedy wrote:why are you parting out my dream car???
Bought it with 35,000km on it, only put 10,000km on it since I bought it in 95. A growing family, a pissed off wife and lack of funds makes for a very low mileage driveway ornament.
My son just got his learners licence and I decided to put the white one back to stock and bought the red one for a parts car. The turbo engine is from the white one.
- 92turbogtz
- Registered User
- Posts: 16
- Joined: Sun Oct 29, 2006 1:50 am
- Location: Victoria, BC
Re: Parting red 1992 GTZ (Victoria, BC)
I would prefer to sell it with the spoiler but if that doesn't happen then I can work something out.DTMAce wrote:Interested in selling the spoiler brake light by itself? Doesn't have to work, so long as the red portion of the lens is not broken.
Re: Parting red 1992 GTZ (Victoria, BC)
Ok, just let me know. Thanks. I am always looking for housings to convert. I have no yard to browse and pull my own around here. lol
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
- SuzukiGhostRider
- Registered User
- Posts: 2464
- Joined: Tue Feb 12, 2008 4:07 am
- Location: Milan NM
- Contact:
Re: Parting red 1992 GTZ (Victoria, BC)
I need the black plastic trim piece around the driver's side door handle/lock. How much shipped to 87021 USA?
-
- Registered User
- Posts: 38
- Joined: Mon Oct 17, 2011 6:43 pm
- Location: Milton, Wi
Re: Parting red 1992 GTZ (Victoria, BC)
Id be interested in the complete turbo setup, and clutch & flywheel. Price? Shipping?
-
- Registered User
- Posts: 280
- Joined: Thu Jun 28, 2001 8:55 pm
- Location: Hillsdale Michigan
- Contact:
Re: Parting red 1992 GTZ (Victoria, BC)
I'm interested in the filler panels if you've got a nice set.
-
- Registered User
- Posts: 50
- Joined: Mon Apr 23, 2001 1:18 am
- Location: Calgary, Alberta
- Contact:
Re: Parting red 1992 GTZ (Victoria, BC)
Its my old car!
PM/Email me, I'm curious where ya got it and the story. I sold it a couple(maybe 3/4 now) years ago to someone taking it to the island.
This page might be of interest to ya http://www.motortopia.com/cars/1992-che ... retta-1262
The flywheel you probably have is a Fidanza, went with the car when i sold it.
PM/Email me, I'm curious where ya got it and the story. I sold it a couple(maybe 3/4 now) years ago to someone taking it to the island.
This page might be of interest to ya http://www.motortopia.com/cars/1992-che ... retta-1262
The flywheel you probably have is a Fidanza, went with the car when i sold it.
-
- Registered User
- Posts: 740
- Joined: Mon Jan 17, 2011 6:48 pm
- Location: Meadville, PA
- Contact:
Re: Parting red 1992 GTZ (Victoria, BC)
How much for the engine harness if there's no cuts and how much for the clear fillers if they are good and not dirty and don't have rusty bolts that will break
1990 Beretta GTZ Quad,226 cams, 3.94 W-41 trans
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
1990 Beretta GTZ Quad 4, 3.61 muncie 5 speed (project)
1968 Chevelle 300 deluxe 327ci 4 speed M-21, 12 bolt 4.10 posi
1978 Chevy K10 Z77 Sport 4x4
1977 GMC Sierra Classic 25 454 crew cab
-Ryan
Re: Parting red 1992 GTZ (Victoria, BC)
It looks like this car have a sunroof. I'm really interested if it's in good condition (I mostly need the hinges if they're not rusted).
Thank you!
Thank you!
1991 Beretta GTZ Quad4