dew strip and outside door trim

gtz92 · Post by **gtz92** » Wed Jul 12, 2006 1:50 pm

I am not sure what the outside door trim is called other than that ...it is the black strip that is almost 2" wide and is around the window like a frame. I am also looking for the dew strips..(found that name out by reading on here) that go next to the window.

speedygtz · Post by **speedygtz** » Wed Jul 12, 2006 2:08 pm

i think u can get the dew strips(if u mean that strip the goes along the bottom of the window) at an auto place. i was looking for a pair for mine but i never got around to getting them.

yanalou · Post by **yanalou** » Wed Mar 21, 2007 12:03 pm

These dew strips should be replaced if they are bad. Mine are all cracked and have sharp pointy edges now. I also notice some rust beginning to form at the bottmof the door. I think this is caused by water seeping through the rotten dew strips and sitting at the bottom inside the door. Don't wait until this happens to your Beretta.

90_Black_GTZ · Post by **90_Black_GTZ** » Thu Mar 22, 2007 12:44 pm

Go buy them from GMPARTSDIRECT.COM. You won't want used ones, they will be just as bad, or almost as bad.

1988GTU · Post by **1988GTU** » Sun Mar 25, 2007 1:30 am

(90_Black_GTZ @ Mar. 22 2007,13:44)QUOTEGo buy them from GMPARTSDIRECT.COM. You won't want used ones, they will be just as bad, or almost as bad.
Happen to have a p/n?

Scanman88GT · Post by **Scanman88GT** » Fri Jul 06, 2007 7:16 pm

If you check out the pinned topics in the Repair/Help section of Bstuff.com, I have both of the GM part #'s for the "dewstrips" listed as well as their cost from GMPartsDirect.com. They are still available, but are considered a special order item. The odds of finding decent ones at a junkyard are slim and none. The UV rays from the sun just eat them up over the years.

One other thing to look at if you're collecting water inside your doors at the bottom is your drain holes. Chevy put a few of them in down there and they just might be clogged with crud or something.

I don't think that the ones with the accent stripes are still available, but you can easily mask off the section that gets painted and spray 'em yourself. I hope this helps you. I wasn't real thrilled about the cost, but when you see how nice brand new ones look on your car, it makes it all worth it.

Scanman88GT

1993gtu · Post by **1993gtu** » Wed Sep 12, 2007 1:00 pm

I have the black outside 2" wide door molding on the passenger side only! In perfect new condition!!!

Asking $25.00 + shipping costs.

Send your M.O. to:

Ken Hahn
11739 Cedarwood dr.
Shelby Twp. Mi. 48315
586-306-1322 (cell)

Mike Morris · Post by **Mike Morris** » Thu Sep 13, 2007 3:34 pm

I have some mint used ones as well

Post by **heavywoody** » Thu Sep 13, 2007 4:22 pm

When you're at the junk yard, look for 95-96 Beretta's... supposedly those dewstrips have different material in them that prevent them from fading/cracking/failing as much as the previous years...

Mine are still perfect, not a single crack in them, and the car was an outside car for probably the first 4 years of my ownership... the last 4 it's been garaged.

Asylum · Post by **Asylum** » Thu Sep 13, 2007 7:51 pm

Damn I could really use a set of soft ones for my '92

Anyone come across a set I'm interested.

OR the GM part numbers that were suggested.

asylummotorsports@yahoo.ca

I'm not on here alot.

Thanx Eric

Yellow Pedro??

1993gtu · Post by **1993gtu** » Thu Sep 27, 2007 1:01 pm

So, are ya gonna get my outer door frame molding then?

I only have the passenger side left.

I haven't heard back from you...

1993 GTU @ 586-306-1322 (cell)

Connect with your social network account