91-93 V6 auto engine harness to CANADIA!
- banzai92gt
- Registered User
- Posts: 320
- Joined: Mon Nov 28, 2011 3:16 pm
- Location: Calgary. AB, Canada
91-93 V6 auto engine harness to CANADIA!
Hey guys,
need a new engine harness for my 91 GTZ and there is nothing around calgary to put it from (unless i can get it from a cavy??)
shipped to T2B 1W7 (Calgary, Alberta)
Thanks!
need a new engine harness for my 91 GTZ and there is nothing around calgary to put it from (unless i can get it from a cavy??)
shipped to T2B 1W7 (Calgary, Alberta)
Thanks!
Last edited by banzai92gt on Tue Aug 04, 2015 6:42 pm, edited 1 time in total.
1995 Z26 - 3500 5spd TURBO
![Image](http://i.imgur.com/0IRXSSz.jpg?1)
![Image](http://i.imgur.com/0IRXSSz.jpg?1)
- themixer
- Registered User
- Posts: 1569
- Joined: Fri Aug 14, 2009 12:13 pm
- Location: Truro, Nova Scotia. Canada
Re: 91-94 V6 auto engine harness to CANADIA!
This is going to be difficult to find
what happened to yours?
![Sad :(](./images/smilies/sad.gif)
- banzai92gt
- Registered User
- Posts: 320
- Joined: Mon Nov 28, 2011 3:16 pm
- Location: Calgary. AB, Canada
Re: 91-94 V6 auto engine harness to CANADIA!
Got manhandled by the guys helping me take the engine out the last time...
1995 Z26 - 3500 5spd TURBO
![Image](http://i.imgur.com/0IRXSSz.jpg?1)
![Image](http://i.imgur.com/0IRXSSz.jpg?1)
Re: 91-94 V6 auto engine harness to CANADIA!
There is a 94 z that just entered the yard by my work...
- banzai92gt
- Registered User
- Posts: 320
- Joined: Mon Nov 28, 2011 3:16 pm
- Location: Calgary. AB, Canada
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
- banzai92gt
- Registered User
- Posts: 320
- Joined: Mon Nov 28, 2011 3:16 pm
- Location: Calgary. AB, Canada
Re: 91-94 V6 auto engine harness to CANADIA!
bah!! thats what i was hoping you werent gonna say.. haha
1995 Z26 - 3500 5spd TURBO
![Image](http://i.imgur.com/0IRXSSz.jpg?1)
![Image](http://i.imgur.com/0IRXSSz.jpg?1)
- banzai92gt
- Registered User
- Posts: 320
- Joined: Mon Nov 28, 2011 3:16 pm
- Location: Calgary. AB, Canada
Re: 91-94 V6 auto engine harness to CANADIA!
Bump, still looking
need to get this car done and out of the garage! if not, ill have to scrap the shell..
![Smile :)](./images/smilies/smile.gif)
1995 Z26 - 3500 5spd TURBO
![Image](http://i.imgur.com/0IRXSSz.jpg?1)
![Image](http://i.imgur.com/0IRXSSz.jpg?1)
Re: 91-94 V6 auto engine harness to CANADIA!
Would a Corsica harness work? Identical layout mechanically, so I'd assume it would? There are several at the local yard here I could source, but it's a decent amount of time/labor to remove one in-tact. Have to spent hours chipping tar away and HOPE none of the connectors are so brittle that they snap off when you remove them from the sensors.
-Aaron
'92 Beretta GTZ 2.3L 5M - Undergoing "unibody off" restoration ATM (almost done!)
'93 Beretta GT "MISEREE" 3.1 5M
'95 Beretta Base DGGM 2.2 5M
'96 Beretta "FAUXZ26" 2.2 5M
'92 Beretta GTZ 2.3L 5M - Undergoing "unibody off" restoration ATM (almost done!)
'93 Beretta GT "MISEREE" 3.1 5M
'95 Beretta Base DGGM 2.2 5M
'96 Beretta "FAUXZ26" 2.2 5M
- Asylum
- Registered User
- Posts: 3050
- Joined: Wed Mar 31, 2004 9:36 am
- Location: Hamilton, Ontario, Canada
- Contact:
Re: 91-93 V6 auto engine harness to CANADIA!
A Corsica would be exactly the same, but as you mentioned, it is a bit of work to get it all off in one piece from a 25 year old car.
Cheers!
Cheers!
Eric
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Re: 91-93 V6 auto engine harness to CANADIA!
Do you have a damaged one on hand?
_________
![Image](http://img.photobucket.com/albums/v384/3400GT/Avatar/arrowkeys.png)
-------------
![Image](http://img.photobucket.com/albums/v384/3400GT/Avatar/arrowkeys.png)
-------------
- banzai92gt
- Registered User
- Posts: 320
- Joined: Mon Nov 28, 2011 3:16 pm
- Location: Calgary. AB, Canada
Re: 91-93 V6 auto engine harness to CANADIA!
I do have the damaged, one of my friends said he might be able to fix it.. hes gonna come by and take a look
1995 Z26 - 3500 5spd TURBO
![Image](http://i.imgur.com/0IRXSSz.jpg?1)
![Image](http://i.imgur.com/0IRXSSz.jpg?1)
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: 91-93 V6 auto engine harness to CANADIA!
If you are good at wiring then there is no reason why it can't be repaired and used... If you had nothing then I could understand starting from scratch is a bit of a task...
Re: 91-93 V6 auto engine harness to CANADIA!
The 94 Z that i previously stated was in a yard near me was removed within a day of me making that post but i do recall a couple of corsica's there...i'll check what is there and get back with you tomorrow.