Beretta.net

Need the stock by-pass tube for a 95 3100 with the threaded end that goes into the lower intake. Anyone got an extra?
Or I could use a 2000 big port lower. Sent my extra away for porting and had it tapped for the stock threaded end. Somehow I over torqued the coolant temp sensor and cracked my lower. Would like to have one of the two before the three day weekend so I can get the repairs done.

Ok I was in a panic. Now I must add that the tube has been found on Ebay and the connecter too. Down to just the lower intake. Why? Well there is not much of a need for ported intakes on this worn out engine. Would like to save them for a newer one. Also this would save repair time by not adding something else to the long line of things to do.
Asked Ben at 60 Degree if he had one too. Waiting for a reply at this time.

so your looking for a 2000 big port lower? Or a 1996 lower will do?

Got to be a big port 3100 or 3400. I have big ports on it right now.

Ben tells me that he has 3400 lowers. It will be late, but will serve as a backup. He has more than one if anyone needs a lower.