INDY Parts Needed
INDY Parts Needed
I am looking for various parts to get my Indy car back up and alive. If you have any of the following items, please send me picts/price/terms. Prefer PayPal.
-Front lower lip/deflector (have been trying for this one for some time)
-Rear Bumper Impact Absorbers (both sides)
-Dash
-Front Window "Beretta" decal
-Rear Bumper decals
-Interior Door Trim Panels (both sides)
-Exterior Indy side mouldings (both sides)
If you have other Indy parts laying around, please let me know! Thanks!
-Front lower lip/deflector (have been trying for this one for some time)
-Rear Bumper Impact Absorbers (both sides)
-Dash
-Front Window "Beretta" decal
-Rear Bumper decals
-Interior Door Trim Panels (both sides)
-Exterior Indy side mouldings (both sides)
If you have other Indy parts laying around, please let me know! Thanks!
Re: INDY Parts Needed
Check this thread, this guy has brand new parts for sale. Not cheap, but not going to find anything better. Has the entire GTU ground effects kit for 800.
http://www.beretta.net/forum/viewtopic.php?f=54&t=8729
http://www.beretta.net/forum/viewtopic.php?f=54&t=8729
94' Z26 Project - 95' Base Project - Custom LED Light Conversions!
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
Chosen Proposal Submission & Committee Member for Beretta Fest 2012 in Traverse City Michigan
- SummitBalt08
- Registered User
- Posts: 1062
- Joined: Fri Jun 04, 2010 11:10 am
- Location: Sidney, Ohio
- Contact:
Re: INDY Parts Needed
I'm in Ohio and have some Indy parts! What color is yours? Yellow or teal?
If its teal I have a factory set of decals for the doors, fenders and windshield. I also have a N.O.S. Beretta Indy dash emblem.
If its teal I have a factory set of decals for the doors, fenders and windshield. I also have a N.O.S. Beretta Indy dash emblem.
-Shawn
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Re: INDY Parts Needed
Well got lucky and drove 4 hours today to strip an Indy in a junk yard finding most everything except the:
interior door trim panels
rear bumper energy absorbers
rear bumper decals "Beretta Indy"
windshield decal
The new problem is my body guy says I need a new rear body panel (P/N 20584102) and my dash cannot be fixed.....please keep me in mind if you know about these, where, and how much!
interior door trim panels
rear bumper energy absorbers
rear bumper decals "Beretta Indy"
windshield decal
The new problem is my body guy says I need a new rear body panel (P/N 20584102) and my dash cannot be fixed.....please keep me in mind if you know about these, where, and how much!
-
- Registered User
- Posts: 10
- Joined: Tue Nov 08, 2011 12:49 am
- Location: Reno, NV
Re: INDY Parts Needed
Hoe much do you want for the Decal set for a Teal Indy. Been trying to locate for awhile. I will take the whole set. Just name your price shipped to 89436. Thanks
- SummitBalt08
- Registered User
- Posts: 1062
- Joined: Fri Jun 04, 2010 11:10 am
- Location: Sidney, Ohio
- Contact:
Re: INDY Parts Needed
Replied to your pm
-Shawn
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
Been on the Beretta Forums since '04
94 Black Quad 5 spd Z26 ->3500 6 spd ZR6
Bfests '11,'12,'14
July 2012 Bnet Calendar
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: INDY Parts Needed
There ya go dude!mouseman wrote:The new problem is my body guy says I need a new rear body panel (P/N 20584102
http://parts.nalleygmc.com/showAssembly ... bly=389106
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Re: INDY Parts Needed
Thanks for the link.....sadly the part is discontinued by our friends at GM. I need to find some residual stock somewhere apparently. The one I bought yesterday in a junk yard is apparently in worse condition than the one I'm replacing........
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: INDY Parts Needed
What all involves removing that piece of sheet metal? Drilling out spot welds? I saw a red one in awesome condition at the yard yesterday.mouseman wrote:Thanks for the link.....sadly the part is discontinued by our friends at GM. I need to find some residual stock somewhere apparently. The one I bought yesterday in a junk yard is apparently in worse condition than the one I'm replacing........
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Re: INDY Parts Needed
The yard I just pulled from really took a hack job to it....they cut into the quarters for it and they left the energy absorbers and the bumper assembly on it....now I have a bumper I don't need and will have to sell it.
The welds are part of it, but their are major seems to be cut out of it also.....not a body guy, but would think there would've been an easier way to remove it.
The welds are part of it, but their are major seems to be cut out of it also.....not a body guy, but would think there would've been an easier way to remove it.
Re: INDY Parts Needed
P/N 20584102...is $200.00 from vintage parts. P/N 22069150..impact absorber ...is $150.00 from vintage parts
Do wish you people would list where you are from or at least fillout your profile.....It can be helpful.
Do wish you people would list where you are from or at least fillout your profile.....It can be helpful.
90 INDY, '10 SS, 96 C4 CE (86,600 mi. on the Indy, 2nd at super chevy show, 02, 03,1st in 01, 04, 05, 06, 07,08 !! sadly sold)
Re: INDY Parts Needed
Do concur...90INDYLIN wrote: Do wish you people would list where you are from or at least fillout your profile.....It can be helpful.
1989 GTU - The Nice Car
1989 GTU Mock - The Neglected Car
1989 Base Model - The Rally Car
1989 GTU Mock - The Neglected Car
1989 Base Model - The Rally Car
Re: INDY Parts Needed
My sincerest apologies for offending so many here.......I am new and learning this site as I go along....including getting my location on my profile, which I updated with my location prior to stylus comment. I appreciate everyones assistance and kindness.