Not your average Z26... a resurrection

Tell us about your Beretta and Post an Image
Post Reply
heavywoody
Global Moderator
Posts: 1991
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Contact:

Not your average Z26... a resurrection

Post by heavywoody »

So some of you know me, and some of you have met me. Since I'm getting ready for some major updates on the Z, I figure there is no better time to start a build thread, which should have been started a long time ago.

Original purchase date: April 21st, 1999
Model: 95 Z26 with all options minus factory sunroof and CD player
Original mileage: 60,833
Current mileage: 178,XXX

Autocrosses attended - 2 (I need to work on this!)
Drag strips attended/raced - 3 (I also need to work on this!)
BFests attended - Me - 11; me with the Z - 8
Best of BFest award in 2009 and 2013
Best Engineered award in 2010
Current HP (dyno'd at BFest 2009) - 184 HP and 204 TQ at the wheels
Best 1/4 - 15.2 at I don't remember lol... that time was on my heavy 17" wheels with heavy 12" rotors - my trans doesn't shift smooth and I need more practice)

Drivetrain mods:
3400 w/ approx 75K - ported/polished intake manifolds, ported heads, polished bowls, Comp Cam springs, SS valves, work done by Ben @ WOT-Tech
TCE lifter springs
5spd swap (first member to complete the conversion)
Fidanza lightweight flywheel (8 lb vs 15 lb stock)
Clutchmasters Stage 3 flywheel/pressure plate
EP Race LSD
Rodney Dickman shifter bushings (both on the shifter mechanism in the console and on the trans itself)
Transgenic CAI
2.5" custom bent exhaust from the manifold back
Borla Turbo muffler with dual intercooled round slash-angled tips
Catco hi-flow cat
FFP dogbone on driver side subframe
SSI dogbone on passenger side subframe
FFP underdrive pulley
RK Sport poly upper motor mount insert
Custom billet/poly trans mount
OBDII swap complete with alternator cooling duct, 96 PS lines, twilight-sentinel headlights, and DRL's

Suspension mods:
Custom valved Bilstein struts/shocks
Eibach Springs
30mm front bar with poly bushings and poly end links (believe it or not my car had a 28mm bar on it when I first got it)
Addco 26mm rear bar with polygraphite bushings
GM strut tower brace
Mantapart rear strut tower brace
Welded control arms
Polygraphite control arm bushings
87-93 style control arms (converted to horizontal style control arms)

Brakes:
12" F-body brakes with C5 Corvette calipers: http://www.beretta.net/forum/viewtopic.php?f=11&t=1317
Have since reverted back to stock brakes since I sold my 17" wheels

Exterior mods:
Repainted in 2003 factory Cayenne Red Metallic (PPG base coat with 3 coats of House of Kolors clear, wet sanded)
Power mirrors from Street Scene retrofitted in 2001 (switch in center console)
European tail lights (first member with them installed in the US)
Wingless trunk
Eggcrate grill
Removed door ding moldings
20% tint all around

Interior mods:
Leather GTZ steering wheel
Lotek A-pillar dual gauge pod
Leather shifter boot
Leather shift knob from late 90's F-body
Dark grey overhead console added from a Lumina? minivan
Autometer Ultra-lite Wideband monitoring gauge
Autometer Ultra-lite II boost gauge
New carpet/floormats
Minor dark grey interior painted accents (vents and cupholders in dash)
Dashmat dash cover (over an excellent condition dash)
Alpine CDA-7998 headunit
Alpine 6.5" components (tweeters located where original mirror adjustment knobs were in doors)
Kicker 6"x9" "sub" speakers
Alpine MRV407 amp for interior speakers
Alpine MRV357 amp for sub (used to have a 12" Alpine Type S sub - since has been rerouted to power the Kicker's)

Wheel history:
Stock Z26 meat slicers (1999-2002)
Black cross laces (ran during winter of 2001-2002 - the last winter this car has seen)
Enkei Shogun 17"x7" 38et (2002-2013)
NOS GTU wheels (2013-Present) with Dunlop Z2 Star Spec tires in 225/50/16

Miscellaneous stuff:
Blinders removed from fog lights
LED license plate light
Reflective decal over "BERETTA" on rear filler panel and on Chevy logo on grill
Strut tower caps (flat style)

First wax:
Image

3400 swap:
Image

Old wheel/brake setup:
Image

Current setup:
Image


Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Image
heavywoody
Global Moderator
Posts: 1991
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Contact:

Re: Not your average Z26... a resurrection

Post by heavywoody »

Things on my plate for this car coming up over the next several months:
Euro headlight install w/ HID retrofit
Mach 1 lip install
Neon rear disk install (along with some "restoration" of the rear end of the car)
Wilwood front disk install
Del-alum front control arm bushings
Poly rear axle bushings
Custom coilover suspension
Get tires for new wheels (probably going with 245/40/17)
Begin work on engine build
Possible trans swap to 6spd F40 trans
Fix headliner and sunvisors


Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Image
bonecrrusher
Registered User
Posts: 677
Joined: Thu Apr 26, 2001 3:11 pm
Location: Charlotte, NC

Re: Not your average Z26... a resurrection

Post by bonecrrusher »

Image

LOL - need more build pics!


2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Not your average Z26... a resurrection

Post by Money pit Beretta »

As always I'll be watching. Must have been a hell of a shock going back to stock brakes!


keep'em flying!
CorvetteBeretta
Registered User
Posts: 423
Joined: Thu Mar 06, 2014 10:28 am
Location: New West B.C. Canada

Re: Not your average Z26... a resurrection

Post by CorvetteBeretta »

I'm interested to see this custom coil over setup.


Image
Robert 89gt
Registered User
Posts: 535
Joined: Fri Oct 29, 2010 8:52 am

Re: Not your average Z26... a resurrection

Post by Robert 89gt »

Car looks badass, I'm getting excited myself for a few upgrades!i love my del-alum bushings! What are you planning for an engine build?


MY91GT(Z)
Registered User
Posts: 1255
Joined: Sun Mar 12, 2006 12:11 am
Location: Rochester New York
Contact:

Re: Not your average Z26... a resurrection

Post by MY91GT(Z) »

Eager.to see what becomes of this looking foward to the build.. u will love poly n del a lum


93 GT cammed 3500 TORSEN, headers,intake,wilwood,poly/delrin mounts, 2.5 S.S,Exhaust,dickman kits,GTUspoiler,Euro headlights-tails-mirrors-fender flares-spoiler,Intrax/Koni,91+blk interior,rr disk swap,s.s.clutch line
heavywoody
Global Moderator
Posts: 1991
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Contact:

Re: Not your average Z26... a resurrection

Post by heavywoody »

bonecrrusher wrote:LOL - need more build pics!
I haven't welded anything on that car, or any car for that matter. Well, no, I take that back; the seat bracket nuts. I did weld those. Still holding up! Welding has gotten much better since then since I actually had a CLASS on it and figured out what I was doing wrong.

No sense in doing build pics of what has been done thus far as it's all kinda pointless. IMHO.

Money, it was a bit of a shock, but it helped knowing what I was getting into. I knew it was temporary...

Engine build is going to be a boosted build.


Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Image
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Not your average Z26... a resurrection

Post by Money pit Beretta »

Well having good lines had to be helpful! Didn't you have SS lines in front, were you able to use them on the stock calipers?


keep'em flying!
User avatar
woody90gtz
Registered User
Posts: 4698
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Contact:

Re: Not your average Z26... a resurrection

Post by woody90gtz »

Get-R-Did! Well...except for the Euro headlights. haha
Image
I think that's the best pic you have of that car...solid grille...and no shiny wheels!


91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
User avatar
DanteGTZ
Registered User
Posts: 767
Joined: Sun Dec 16, 2012 4:38 pm

Re: Not your average Z26... a resurrection

Post by DanteGTZ »

I envy you guys with your ambitious attitudes. I have so many things I want to do to my cars but I often don't know where to start and don't begin as a result...


1993 Quasar Quad4 GTZ - Project WTF

Previous Berettas: 90 GT, 93 Quasar GTZ, 93 Garnet GTZ, 93 Aqua GT
User avatar
KFLO 93 GT
Registered User
Posts: 846
Joined: Thu Jul 25, 2002 2:46 am
Location: Iowa
Contact:

Re: Not your average Z26... a resurrection

Post by KFLO 93 GT »

You do happen to have fantastic access to a community of knowledgeable folks. Many of whom know ya and would be glad to help!

Geoff - where are da updates mane?


Image
93 GTs
heavywoody
Global Moderator
Posts: 1991
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Contact:

Re: Not your average Z26... a resurrection

Post by heavywoody »

Nothing to report yet... had to get the Forester situated for my trip to Detroit this weekend, been playing "repair cars to get them out of the garage so I can start teardowns". Should hopefully have something to update in the next couple weeks.

Plus, with a baby on the way, I've got some work to do in the house too... time is limited :(


Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
Image
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Not your average Z26... a resurrection

Post by Money pit Beretta »

That is a bit of a bottle neck on the project. A baby? How did that happen(LOL)?


keep'em flying!
User avatar
Money pit Beretta
Registered User
Posts: 6411
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas

Re: Not your average Z26... a resurrection

Post by Money pit Beretta »

Geoff where did you have your amp power wire inter the firewall? I've got to run a 8awg wire into my car.


keep'em flying!
Post Reply