newbie

Keep this to general Beretta/Board/Community topics.
User avatar
ROADFIXER
Registered User
Posts: 3
Joined: Sun Nov 26, 2006 6:39 pm
Location: W.central Ohio

newbie

Postby ROADFIXER » Tue Nov 28, 2006 12:40 am

hows everybody....i'm in w.central ohio and am building a beretta to go racing with for the 07 season it a 88 base that i'll be spending the winter putting a cage in and going thru the suspension...

so heres my first question what is the better choise...2.8 or 3.1 as much as i would like to up it to a 3.4 i cant, i asked....

which motor can i run the guts out of week after week

which motor can hold up to revs without to much mods being done to the internals....

thanks....


take out the hole...put in the bump...

User avatar
Chazzman
Registered User
Posts: 280
Joined: Thu Jun 28, 2001 8:55 pm
Location: Hillsdale Michigan
Contact:

newbie

Postby Chazzman » Tue Nov 28, 2006 3:49 pm

Both motors are identical besides displacement.  What is allowed to be done to the motor in your type of racing?


'92 GT-Z 3.1L 5spd lot's of GO FAST stuff  :banana

User avatar
ROADFIXER
Registered User
Posts: 3
Joined: Sun Nov 26, 2006 6:39 pm
Location: W.central Ohio

newbie

Postby ROADFIXER » Tue Nov 28, 2006 9:05 pm

i would think anything goes on the inside of the engine... rules call for the outside to appear stock....so unless it's made by gm it wont fly...





take out the hole...put in the bump...


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 9 guests