Quad4 cams cant find them on?

Archived topics from the Other Tech Questions Forum
Guest

Quad4 cams cant find them on?

Postby Guest » Mon Mar 10, 2003 3:18 am

i cant find any of these cams on the difrent cam manufactures web sights could some body give me a link or something?
Cam                     Lift  Duration
===========================
W41                     .410  .219
W41#2(hot cams) .410  .241  
Crane Compucam .430  .222
Crower cams        .346  .224



User avatar
conlinj
Registered User
Posts: 7
Joined: Sun Oct 28, 2001 4:28 pm
Location: Philadelphia PA
Contact:

Quad4 cams cant find them on?

Postby conlinj » Mon Mar 10, 2003 11:01 am

I called crane before and the don't make them anymore they said they ran out of cores, they said they could regrind the factory cams.  Comp cams makes them and the specs are:

  SPEC CARD
 PART #: 53-000-5I   &   53-000-5E
 ENGINE: QUAD 4CYL
GRINDING INSTRUCTIONS 1
 ""     ""    2
GRIND #: Q4E 9010 /9010  S 110.0
SPC INST 1:
SPC INST 2:
J. DIAM: STD   INT   EXH
VALVE ADJUSTMENT  .004  .004
GROSS VALVE LIFT  .000   .000
DURATION @   .050
  TAPPET LIFT  212   212
VALVE TIMING   OPEN  CLOSE
 @ .050   INT   3-   36
      EXH   36    3-
SPECS FOR CAM INST. @  110 CENTERLINE
          INT   EXH
DURATION @  .050   212.03  212.03
   LOBE LIFT   .410   .410
LOBE SEPARATION     110.0
ROCKER ARM RATIO

When i filled out the request sheet i told them that i wanted more low end power which would explain the lower duration then the w41's, they might have other grinds depending on the power band you want.






Jim Conlin
1986 Camaro Z28
1986 Firebird Formula
1988 Monte Carlo LS
2007 Trailblazer SS
Looking for another GTZ

Guest

Quad4 cams cant find them on?

Postby Guest » Mon Mar 10, 2003 4:55 pm

With Quad 4's it's upper ban power you want, not low end torque.... you would be faster off the line, but slower in the end....



Guest

Quad4 cams cant find them on?

Postby Guest » Mon Mar 10, 2003 5:09 pm

i want the w41 cams but i dont want to buy them from mantapart because they are 450 bucks and thats way over priced for me i just wantend to look for a company that sells them for cheaper



User avatar
ErichZ26
Registered User
Posts: 922
Joined: Thu Apr 26, 2001 1:59 pm
Location: Chicago
Contact:

Quad4 cams cant find them on?

Postby ErichZ26 » Mon Mar 10, 2003 9:13 pm

Quote (gtzberetta @ Mar. 10 2003,16:09)
i want the w41 cams but i dont want to buy them from mantapart because they are 450 bucks and thats way over priced for me i just wantend to look for a company that sells them for cheaper

GM sold them for $500 a stick....$1000 a pair.


Image
1990 Beretta GTZ 1995 Beretta Z26 1996 Beretta Z26

User avatar
98beretta kid
Registered User
Posts: 46
Joined: Sat Oct 13, 2001 2:59 pm
Location: Bay City, Michigan

Quad4 cams cant find them on?

Postby 98beretta kid » Mon Mar 10, 2003 9:16 pm

If you want them bad enough, you'll pay the $450 to get them. ;)


-Bryan

1989 Beretta GT (Money pit #1)
1996 GMC Sonoma (Money pit #2)
1993 GTZ ( Couldn't ask for a better Car)

The 3 reasons why I'm broke

Guest

Quad4 cams cant find them on?

Postby Guest » Mon Mar 10, 2003 10:14 pm

the price is up at least 100 bucks since last year



Guest

Quad4 cams cant find them on?

Postby Guest » Mon Mar 10, 2003 10:51 pm

I got mine for free, so keep looking



Guest

Quad4 cams cant find them on?

Postby Guest » Tue Mar 11, 2003 12:14 am

W41 cams off of gmpartsdirect.
Part #         unit price          S&H
24572402    $203.47            $40.69
24572403    $203.47            $40.69

I dont know why S&H is so much on them. I hope its a mistake.



Guest

Quad4 cams cant find them on?

Postby Guest » Tue Mar 11, 2003 4:40 am

That’s some what of a better price becides shiping. What’s the spec of the w41 cams .410 lift 218 degrees duration??? dose gmpd sell cam blanks??



Guest

Quad4 cams cant find them on?

Postby Guest » Tue Mar 11, 2003 9:13 pm

gmpd has high shipping costs because they have low prices...which was the explaination that i got from one of their reps...heh.



Guest

Quad4 cams cant find them on?

Postby Guest » Tue Mar 11, 2003 10:53 pm

That’s reasonable explanation I guess :p



Guest

Quad4 cams cant find them on?

Postby Guest » Wed Mar 12, 2003 3:40 pm

this is the email i got from comp cams these are w41 cams

Hello,   the part number you are looking for is  a 53-000-5I     w/ a
grind number of 9011/9011
that is an intake camshaft.   You will also need a  exhaust camshaft
53-000-5E  w/ a grind number of 9011/9011
               I would recommend installing these on a 112 lobe
separation.
                   I have included 2 spec cards below.        These
cams are  $194.98 ea.
                                                           Thanks,
Hadley
             SPEC CARD
 PART #: 53-000-5I
 ENGINE: QUAD 4CYL
GRINDING INSTRUCTIONS 1
 ""         ""       2
GRIND #: Q4I 9011 /9011  S 112.0
SPC INST 1:
SPC INST 2:
J. DIAM: STD     INT    EXH
VALVE ADJUSTMENT   .004   .004
GROSS VALVE LIFT   .000    .000
DURATION @    .050
    TAPPET LIFT   216    216
VALVE TIMING     OPEN   CLOSE
 @ .050    INT     2-    37
           EXH    41      6-
SPECS FOR CAM INST. @  110 CENTERLINE
                    INT     EXH
DURATION @  .050    215.74   215.74
      LOBE LIFT     .410    .410
LOBE SEPARATION        112.0
ROCKER ARM RATIO                  REQ S



Guest

Quad4 cams cant find them on?

Postby Guest » Wed Mar 12, 2003 7:53 pm

you can get a pair of blanks from mantapart for $200



Guest

Quad4 cams cant find them on?

Postby Guest » Wed Mar 12, 2003 11:07 pm

Then add another $200 to have them ground. I was quoted $125 A CAM to have the W41 cams I have redone...




Return to “Other Tech Questions Archive”

Who is online

Users browsing this forum: No registered users and 1 guest