engine work
engine work
just got parts back from the machine shop.. cylenders were bored 20 over, performance rods and rockers. oversized pistons and new cool air intake with full borla system. trying to estimate how much more HP ill have. maybe yall could give me a hand.
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: engine work
All depends on who tunes it... and kinda odd they were able to install a "full borla system" since they do not exist for our cars.
You also will not gain power by a .020 over bore or performance rods and once again "performance rockers" that do not exist...
This post is really open ended and you will not get any info regarding HP without being more specific.
You also will not gain power by a .020 over bore or performance rods and once again "performance rockers" that do not exist...
This post is really open ended and you will not get any info regarding HP without being more specific.
Re: engine work
ok my mistake the system goes from the cat to the rear. all crome. with a 3in outlet. and belive it or not i did manage to find a set of rockers that fit. there aftermarket.
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: engine work
Engine type, year, all mods done, tune applied to the vehicle and so on...3X00-Modified wrote:This post is really open ended and you will not get any info regarding HP without being more specific.
3" exhaust huh... talk about overkill, especially if your still sporting the stock 1.85" downpipe... once again there is no borla system, it has to be fully custom bent with a borla muffler.
- Asylum
- Registered User
- Posts: 3050
- Joined: Wed Mar 31, 2004 9:36 am
- Location: Hamilton, Ontario, Canada
- Contact:
Re: engine work
There is NOTHING there in the info provided that will increase horsepower.
Well maybe the cool air will help a bit.
3" exhaust might even hurt it.
Well maybe the cool air will help a bit.
3" exhaust might even hurt it.
Eric
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Re: engine work
man no offense 3x00 but you must be a stock man arent you. didnt knw i had to be so percise.. so if it makes u happy yes its a custom pipe. with a borla muffler. and it actualy sounds pretty good. not as loud as u would think. my car is more custom then most would prefer but its come a long way since i first got it. it all depends on your taste i gues. its a 3100 sfi. i dont knw the igzacht HP but what i do knw is its wicked fast. i topped out at 153 mph. i knw that may be hard to belive but its true. i give my word on that.
- Asylum
- Registered User
- Posts: 3050
- Joined: Wed Mar 31, 2004 9:36 am
- Location: Hamilton, Ontario, Canada
- Contact:
Re: engine work
Shut up Eric. Just shut up!!!
Eric
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
Asylum Motorsports
"Where we're not happy 'til YOU'RE not happy!
'91 California Quad (Gone with just a bit of "Seller's Remorse".)
'92 3500 GT gone and not really missed. It was fun. Documented 13.47 N/A.
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: engine work
HAHAHAHA me a stock guy, guess you've never seen my car? and I guess you just don't understand what I'm saying or asking for so I'm going to bow out of this thread.
153mph.. yeah ok.
Good call Eric... Let's just leave this one be and let the others have fun.
153mph.. yeah ok.
Good call Eric... Let's just leave this one be and let the others have fun.
Re: engine work
whatever guys. yall dont believe me. i dont realy care cause i aint gotta prove anything to anyone. my whole life ive always tried to push things to the limit and theres nothing anywere that says it could not do 153. just sayin
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: engine work
Yes there is a ECU restriction of 109mph and the fact that 160hp will never push a 3100lb vehicle that fast unless your going downhill with a tail wind.B&M CUSTOMS wrote:whatever guys. yall dont believe me. i dont realy care cause i aint gotta prove anything to anyone. my whole life ive always tried to push things to the limit and theres nothing anywere that says it could not do 153. just sayin
Either post some facts and some REAL info for someone to go off of to give you a REAL hp number that your requesting or simply stop posting meaningless false info.
-
- Global Moderator
- Posts: 1991
- Joined: Sun Nov 03, 2002 4:10 pm
- Location: Concord, NC
- Contact:
Re: engine work
Who did the tuning?
What are the specs on the cam?
Did you change the compression ratio, and if so, what is it now?
Did you upgrade your muffler bearings?
What are the specs on the cam?
Did you change the compression ratio, and if so, what is it now?
Did you upgrade your muffler bearings?
Geoff
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
95 Z26 Turbo 3400 5spd - R&D Project
Beretta Preservation Society - Director of Acquisitions
- spacecadetz26
- Registered User
- Posts: 578
- Joined: Thu May 10, 2001 9:33 am
- Location: Rockford, IL
- Contact:
- scd88ga
- Registered User
- Posts: 1828
- Joined: Mon Jun 28, 2010 9:02 pm
- Location: Wisconsin Rapids, Wisconsin
- Contact:
Re: engine work
So much EPIC WIN in this thread already! Thank you B&M CUSTOMS for making my day!
'94 Quad 4 H.O. 5 speed Z26, Red & Rare! 1 of 896 Quad Z26's and of those it's 1 of 167 red paint/gray interior!
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
Need A Quality Used Part? Contact me at Posihead Auto Parts!
https://www.facebook.com/pages/Posihead ... 3779691724
- Travelor
- Global Moderator
- Posts: 508
- Joined: Fri Jan 25, 2008 10:15 pm
- Location: Neenah, WI
- Contact:
Re: engine work
I'm pretty sure that unless it was GPS verified (or radar gun) that a stock 3100 can't get up to 156. There are plenty of videos on youtube that show these engines topping out between 130-135 - a modified quad was verified at 142 and that took awhile. If it was a 3400 I might say 145 TOPS, but a 3100 just doesn't have it in it. 10-20mph doesn't seem like that much, but the massive amount of air that is pushing back and down on the car requires more power then it can output.
Obviously driving this fast on public highways is frowned on, I don't think I've been over 100 in years. </getoffmylawn>
EDIT - Was this account already deleted? Was this Brett using another account before noon?
Obviously driving this fast on public highways is frowned on, I don't think I've been over 100 in years. </getoffmylawn>
EDIT - Was this account already deleted? Was this Brett using another account before noon?
1988 GTU
1990 GTZ
Beretta Preservation Society Chairman
"Have you painted your car in a parking lot today?"
1990 GTZ
Beretta Preservation Society Chairman
"Have you painted your car in a parking lot today?"