Tiffwad's Turbo - 2013 Chevy Cruze Eco

Feel free to post about anything here, just keep it work safe.
User avatar
Koots
Registered User
Posts: 688
Joined: Thu Apr 19, 2012 8:11 am
Location: Goose Bay, Labrador

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by Koots »

I'm not sure if GM is still doing it, but I know that installing foglights on the 99+ Silverado/Sierras require a reflash of the BCM to operate all the factory equipment.

Luckily, my 2500HD has pretty much all the bells and whistles available to a 2002 truck and came with it already installed, which makes for a very neat looking install of aftermarket lights,


User avatar
berettaboi
Registered User
Posts: 973
Joined: Sun Mar 23, 2008 10:58 pm
Location: canananada

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by berettaboi »

hahaha fog lights install requires BCM reflash? :fool: I don't think that i'll ever get a newer vehicle if everything needs to integrated...


4th one's a charm, 5th one is, beginnning to sound like this is an addiction...
95 black z26, '96 White z26 awaiting new life, and 2.5 mazda trucks
Image
User avatar
woody90gtz
Registered User
Posts: 4698
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Contact:

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by woody90gtz »

I haven't heard about that...that would be irritating.

So the DR-34s are not available in 5x105 in gunmetal - only silver and matte black. That pic I found is a different pattern.

But...I did find some gunmetals in her pattern by Vision - which is actually the manufacturer of the Summit wheels on my Camaro. I dont like the spokes quite as much as the drags, but I like the center better, and they are a few bucks cheaper. Works for me.

Image


91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
User avatar
Koots
Registered User
Posts: 688
Joined: Thu Apr 19, 2012 8:11 am
Location: Goose Bay, Labrador

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by Koots »

berettaboi wrote:hahaha fog lights install requires BCM reflash? :fool: I don't think that i'll ever get a newer vehicle if everything needs to integrated...
The newer trucks also have VIN locked stereo's that require a reflash when replacing them as well. I don't know if the same thing goes for all of their vehicles but I don't see why they all wouldn't be like this.

Almost all automakers have begun this slow-crawl to insanity, which is why I won't buy a new vehicle because I will have the warranty voided within 6 months for sure. I hate being restricted like that. I've been a tinkerer even before I hit Kindergarten, so I have to pull stuff apart, modify and/or fix them.


Z26_T
Registered User
Posts: 372
Joined: Mon Oct 11, 2010 12:53 pm
Location: Indiana

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by Z26_T »

People probably said the same thing when we went to fuel injection and the use of ECMs...

By reading those install threads it doesn't sound like you need a re-flash... Though:

"The front fog lamp switch signal circuit is grounded momentarily by pressing the front fog lamp switch. The body control module (BCM) energizes the front fog lamp relay by applying ground to the front fog lamp relay control circuit. When the front fog lamp relay is energized, the relay switch contacts close and battery voltage is applied through the front fog lamp fuse to the front fog lamp supply voltage circuit which illuminates the front fog lamps."

Guess we'll see :D.

Those wheels are tits!


heavywoody wrote:Beretta, fast, reliable, and cost effective are words that should not be used in the same sentence.
95' BRM Z26. cammed/ported 3400/3500 Hybrid. HM282, OBD2, Garret T3/T04E 60 Trim, IC.
User avatar
3X00-Modified
Administrator
Posts: 10912
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by 3X00-Modified »

5x105 bolt pattern? WTF was GM thinking... Why make another pattern 5mm different than one they already have!


Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
User avatar
woody90gtz
Registered User
Posts: 4698
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Contact:

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by woody90gtz »

Yeah, that's stupid. Would be nice if it matched the Beretta. I'm assuming it's because those cars were produced overseas before they came to the US market. Australia I think was the first place as a "Holden Cruze". No matter what continent they are one you'd think 5x100 and 5x115 would have the FWDs covered. Although the 5x4-3/4 RWD pattern is only about 5mm different than the 5x115... Seems like 5x100 5x110 5x120 would be the logical way to do it.


91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
User avatar
Koots
Registered User
Posts: 688
Joined: Thu Apr 19, 2012 8:11 am
Location: Goose Bay, Labrador

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by Koots »

I was hoping it wouldn't be as ridiculous, but I had to throw that info out there, just in case something just as stupid was still happening LOL I'd love to get my hands on a good used TECH-II, but I think i'm better off just buying a custom tuning suite to do most of it and then bypass what I can't tune out.

I really like what you are doing with the car, it's definitely going down the same road I would have taken it. I've been liking the electric blue with everything blacked out and a straight up all black.


User avatar
woody90gtz
Registered User
Posts: 4698
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Contact:

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by woody90gtz »

Wheels, tires & intake came in today. Already installed the K&N and took it for a drive. Tiff loves PSH!

Image
Image
Image


91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
bonecrrusher
Registered User
Posts: 677
Joined: Thu Apr 26, 2001 3:11 pm
Location: Charlotte, NC

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by bonecrrusher »

Wait till you change the oil in that thing - the cartridge filter is weird.

Ask Kevin.


2005 Chevrolet Corvette Z51
2005 GMC Sierra 2500HD
2014 Chevy SS
User avatar
woody90gtz
Registered User
Posts: 4698
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Contact:

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by woody90gtz »

Yeah, my mom's Slobalt had one.

Hoping to get the tires mounted this week, but the only good tire place is pretty booked and the TPMS sensors haven't come in yet.


91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
User avatar
3X00-Modified
Administrator
Posts: 10912
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by 3X00-Modified »

Gotta love TPMS... I'm glad that I bought all the tools to activate and change the sensors on my car so I can have two sets of wheels... I bought all the stuff when I had to replace the factory ones and didn't want to deal with a dealer.


Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
User avatar
woody90gtz
Registered User
Posts: 4698
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Contact:

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by woody90gtz »

There is a how-to on Cruzetalk that doesn't look too bad.


91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
Z26_T
Registered User
Posts: 372
Joined: Mon Oct 11, 2010 12:53 pm
Location: Indiana

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by Z26_T »

If you want to purchase the reset tool (if you don't have one) https://gmspecialservicetools.spx.com/T ... px?id=5677 $69 isn't terrible. Not great though. I was able to use the previous TPMS tool on non-GM vehicles once I set the vehicle in relearn mode. Not sure if this one will (but I imagine it will..)


heavywoody wrote:Beretta, fast, reliable, and cost effective are words that should not be used in the same sentence.
95' BRM Z26. cammed/ported 3400/3500 Hybrid. HM282, OBD2, Garret T3/T04E 60 Trim, IC.
User avatar
3X00-Modified
Administrator
Posts: 10912
Joined: Thu Jul 05, 2007 9:18 am
Location: Brooklyn CT

Re: Tiffwad's Turbo - 2013 Chevy Cruze Eco

Post by 3X00-Modified »

I have that tool, or at least a similar one, as far as I know that's how you wake up or turn on new sensors, you still need a way to program the new codes in unless your having a shop do it all.


Mr.Pink
Supreme Unit
Sleepy Goodness
"Beretta Guy"
Post Reply