OEM Fuel Lines

Feel free to post about anything here, just keep it work safe.
1995BerettaZ26
Registered User
Posts: 4
Joined: Tue Sep 02, 2014 10:53 pm

OEM Fuel Lines

Postby 1995BerettaZ26 » Wed Jun 10, 2015 1:53 pm

Hello everyone, okay so I got a 95 Beretta Z26 and it needs fuel lines replaced. Was wondering if anyone knows where I could possibly get a set of the OEM fuel lines to put on this car since GM discontinued making them. The fuel lines on this car are pretty much done for. They are so rusty and got holes popping in them every time I repair one spot. Figured it's best to replace these. I was thinking of checking out a salvage yard. Can anyone help out here?



User avatar
3X00-Modified
Administrator
Posts: 10657
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: OEM Fuel Lines

Postby 3X00-Modified » Wed Jun 10, 2015 1:57 pm

You basically outlined the only place to get them... Pulling a good set off a salvaged car, which will be hard with how they treat them going in the yard... OR go buy some 3/8 tubing and start bending.



User avatar
themixer
Registered User
Posts: 1516
Joined: Fri Aug 14, 2009 12:13 pm
Location: Truro, Nova Scotia. Canada
Has thanked: 3 times
Been thanked: 16 times

Re: OEM Fuel Lines

Postby themixer » Wed Jun 10, 2015 2:02 pm

I made my own, took a few hours cost about $20. Usually if your gas lines are rotted out, the brake lines cannot be in much better shape. consider replacing them all!



User avatar
woody90gtz
Registered User
Posts: 4033
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Has thanked: 4 times
Been thanked: 7 times
Contact:

Re: OEM Fuel Lines

Postby woody90gtz » Wed Jun 10, 2015 10:01 pm

Yup. I think I got one of the last ones from GM! muhahahahaha

But it's easy enough to bend them yourself. Get some unions and a decent bender and you should be good to go.


Image
91 "SS" 3400/5spd - EP, FFP, TCE, SPEC, DSS, S&S, OBD1, 13s? GEARHEAD dezign

User avatar
Cliff8928
Administrator
Posts: 1772
Joined: Wed Mar 03, 2004 10:03 pm
Location: Long Grove, IL
Has thanked: 8 times
Been thanked: 10 times
Contact:

Re: OEM Fuel Lines

Postby Cliff8928 » Thu Jun 11, 2015 2:00 am

If i had to fabricate them, I'd grab a few rolls of CuNiFer line and never have to worry about it again. It's expensive to find a flaring tool that will create a saginaw flare however.


Cliff Scott
Image


Return to “Off Topic”

Who is online

Users browsing this forum: No registered users and 4 guests