Page 1 of 1
OEM Fuel Lines
Posted: Wed Jun 10, 2015 1:53 pm
by 1995BerettaZ26
Hello everyone, okay so I got a 95 Beretta Z26 and it needs fuel lines replaced. Was wondering if anyone knows where I could possibly get a set of the OEM fuel lines to put on this car since GM discontinued making them. The fuel lines on this car are pretty much done for. They are so rusty and got holes popping in them every time I repair one spot. Figured it's best to replace these. I was thinking of checking out a salvage yard. Can anyone help out here?
Re: OEM Fuel Lines
Posted: Wed Jun 10, 2015 1:57 pm
by 3X00-Modified
You basically outlined the only place to get them... Pulling a good set off a salvaged car, which will be hard with how they treat them going in the yard... OR go buy some 3/8 tubing and start bending.
Re: OEM Fuel Lines
Posted: Wed Jun 10, 2015 2:02 pm
by themixer
I made my own, took a few hours cost about $20. Usually if your gas lines are rotted out, the brake lines cannot be in much better shape. consider replacing them all!
Re: OEM Fuel Lines
Posted: Wed Jun 10, 2015 10:01 pm
by woody90gtz
Yup. I think I got one of the last ones from GM! muhahahahaha
But it's easy enough to bend them yourself. Get some unions and a decent bender and you should be good to go.
Re: OEM Fuel Lines
Posted: Thu Jun 11, 2015 2:00 am
by Cliff8928
If i had to fabricate them, I'd grab a few rolls of CuNiFer line and never have to worry about it again. It's expensive to find a flaring tool that will create a saginaw flare however.