What (scan) tools do you use?

Feel free to post about anything here, just keep it work safe.
Post Reply
User avatar
Rettax3
Registered User
Posts: 1805
Joined: Mon Oct 22, 2012 3:34 pm

What (scan) tools do you use?

Post by Rettax3 »

It always interests me to know how other owners take care of their cars. With the age (and lets face it, relatively low economic value) of our cars, getting them repaired competently for a reasonable price is kind of difficult. Since our Berettas and Corsicas (and Tempests for those of us further North) span GM OBD1, 1.5 (hate, hate, hate), AND OBD2, we really do have a wealth of variety.

So, for those of us who either do our own repairs, or at least want to know what is going on with our fine four-fendered friends before simply handing our keys and credit-cards to someone with a wrench, the question for today is, how do you scan your cars? What diagnostic tools do you use?

Always budget-minded, like my cars, some of my tools are, um, 'vintage'. I own a Snap-On 'Brick', old MT2500 series. Capable of OBD 1-2, it is still versatile. With the add-on cartridges I have, I am limited to generic OBD2 past 2001. Otherwise, I can get pretty specific for most vehicles I am likely to see. I no longer do much with European cars, and have never purchased any of those modules for my 'Brick'. I also have an Innova OBD 2 generic scanner, and the OBD 1 connection kit as well, but it is very limited on OBD 1 -i.e., no data, just codes. I also have an ELM 327 to connect my laptop to an OBD 2 vehicle, and have been happy with it for what it is. The graphing options are nice with some of the available software, and for $14 I couldn't go wrong. Some of this was bought as a down-graded set to cheaply replace the extensive tools that were stolen about five years ago. Oh, and lets not forget one of the ultimate diagnostic tools, the well-rounded and ever utilitarian paper clip!

What other tools have been chosen, and why? What features do you use most?
Last edited by Rettax3 on Sun Feb 25, 2018 1:06 am, edited 1 time in total.


1989 SuperCharged 3800 Srs-II (First)Six-Speed GTU
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
User avatar
GT_Indy
Registered User
Posts: 615
Joined: Thu Apr 21, 2016 2:23 pm

Re: What (scan) tools do you use?

Post by GT_Indy »

I used the "APU1" from moates.net with tuner pro and logging files for my OBD1 GM cars.
Works with laptop over USB.

I used the "Blue Driver" for all 1996 and up OBD2 and newer cars.
Work with my android phone over Bluetooth.
Can do a very large range of functions and tests and clearing codes and stuff.
Vin scan also for recall checks and other stuff.
Lots of live data too.
I believe it also has free app updates for life.

I have a couple other scanners but these two options always worked the best for me


Bapsu
Registered User
Posts: 100
Joined: Mon Aug 14, 2017 4:05 pm

Re: What (scan) tools do you use?

Post by Bapsu »

Hmm, since this thread seem to be suitable for my little question I guess im going with this.

My Corsica is -93, with ALDL. Does that mean its obd1? What kind of data I cant get out of that box (except jumping codes with a+ b pins of course), and specially, with what tool?


User avatar
woody90gtz
Registered User
Posts: 4698
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Contact:

Re: What (scan) tools do you use?

Post by woody90gtz »

I also have the Moates APU1 Autoprom that I use with TunerPro RT. It allows you to datalog and read codes as well as read and burn tunes on the chip.

Bapsu your car is obd1, so you can get just a cheap cable to read information via a laptop, or you can buy more expensive devices to be able to program data as well. Moates.net has descriptions of their products online.


91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
User avatar
GT_Indy
Registered User
Posts: 615
Joined: Thu Apr 21, 2016 2:23 pm

Re: What (scan) tools do you use?

Post by GT_Indy »

Yah my APU1 also can emulate and read/write rom files to the chips.
I forgot there is probably a lesser expensive version that can read codes and data log without the chip stuff but I never looked into those.


Bapsu
Registered User
Posts: 100
Joined: Mon Aug 14, 2017 4:05 pm

Re: What (scan) tools do you use?

Post by Bapsu »

So just the obd1 cable to usb/something similar is enough for datalogging? What sw I need?

What kind of things can be programmed in these ecus?


User avatar
GT_Indy
Registered User
Posts: 615
Joined: Thu Apr 21, 2016 2:23 pm

Re: What (scan) tools do you use?

Post by GT_Indy »

Bapsu wrote:So just the obd1 cable to usb/something similar is enough for datalogging? What sw I need?

What kind of things can be programmed in these ecus?
For just the cable I'm not sure.

With the full APU1 the ECM can be programmed. Spark and fuel tables, fan cycle settings, etc. This uses Tuner Pro RT software. My APU1 came with it with I got mine.
Factory chips cannot be reflashed. The 27SF512 chip is used as it can be reflashed. And a little adapter thing is plugged into the eeprom slot.

If you email moates.net they can answer more detailed questions about their products.


User avatar
woody90gtz
Registered User
Posts: 4698
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Contact:

Re: What (scan) tools do you use?

Post by woody90gtz »

Yes, a cable and TunerPro are all that is needed to datalog. If you are stock, that's really all you need.

If you do want to make changes to the tune, damn near everything is changeable.


91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
Bapsu
Registered User
Posts: 100
Joined: Mon Aug 14, 2017 4:05 pm

Re: What (scan) tools do you use?

Post by Bapsu »

Hmm, sounds dangerous for me. :D

I already own 2.3t Saab 9-5 as my daily driver, Trionic 7 box and its tuneability (re85 + 240hp) leads to endless hunger...

I'll take look to the cable and sw for sure, might be soon if I cant sort out my IAC problems in any other way.


aurolio
Registered User
Posts: 27
Joined: Sun Mar 25, 2018 10:42 pm

Re: What (scan) tools do you use?

Post by aurolio »

Another APU1 with Tunerpro user here. Very handy.


User avatar
Rettax3
Registered User
Posts: 1805
Joined: Mon Oct 22, 2012 3:34 pm

Re: What (scan) tools do you use?

Post by Rettax3 »

Want to sell it? :D


1989 SuperCharged 3800 Srs-II (First)Six-Speed GTU
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
Juancarlos
Registered User
Posts: 3
Joined: Thu Oct 29, 2020 7:40 am

Re: What (scan) tools do you use?

Post by Juancarlos »

Are the above mentioned tools on sale?


User avatar
Rettax3
Registered User
Posts: 1805
Joined: Mon Oct 22, 2012 3:34 pm

Re: What (scan) tools do you use?

Post by Rettax3 »

I've seen a couple come around, hard to find a deal worth buying a used one vs a new, if you are talking APU1, Ostrich, etc. Watch ebay too. What exactly are you after? Just anything for data-reading, or do you want to be able to reprogram too?


1989 SuperCharged 3800 Srs-II (First)Six-Speed GTU
1990 Turbo 3.4 5-Speed T-Type
1990 4.0L 4-Cam 32-Valve V-8 5-Speed Indy GTi (Project)
1990 Stock(!) 3.1 MPFI Auto Indy
1995 LA1/L82 4T60E Z-26
1995 3.4 DOHC Turbo 5-Speed Z-26
Post Reply