Exhaust tips? Can I see some pics?

Post information about exhaust systems. Either purchased or custom made
Guest

Exhaust tips? Can I see some pics?

Postby Guest » Sat Oct 08, 2005 8:06 am

The Borla ProXS mufler finally arived. Now to pick a Tip.
Have 2 in mind.
Both from Summit Racing.
1st: Toucan Oval shapped stainless steel.
2nd: Hooker Dual round with a slash cut. stainless steel. Keeps getting B/O'd. Now Est. 11/3 ship date.

The muffler has an Offset Inlet and Center Outlet. 2 1/4" both ends. And a smaller body than the stock unit. Which brings me to the next Question.
What Hanger (Strap) are you using? The stock wont work. The body of the Borla is considerably smaller. Thinking maybe one from a Sunbird/Cavalier might work.
Thanks All.
Chris



User avatar
wicked-irocz
Registered User
Posts: 1028
Joined: Thu Feb 20, 2003 11:21 pm
Location: South Central MN

Exhaust tips? Can I see some pics?

Postby wicked-irocz » Mon Oct 10, 2005 9:51 pm

you can use a universal hanger or two.  thats what I did. I dont think any other factory unit will work unless you weld brackets on the muffler.


94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler :shock:

Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo

Guest

Exhaust tips? Can I see some pics?

Postby Guest » Mon Oct 10, 2005 10:26 pm

I guess I'll leave the Hanger problem to the shop.
The Hooker dual outlet tip weighs about 2.8Lbs. Wonder if this is going to be too heavy???
I could always get the Borla XS tip. Somewhat oval. More like a square with rounded corners.
What to use???
Chris







User avatar
heavywoody
Global Moderator
Posts: 1848
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Has thanked: 8 times
Been thanked: 15 times
Contact:

Exhaust tips? Can I see some pics?

Postby heavywoody » Tue Oct 11, 2005 12:55 am

You can look around on my site if you want (link below the sig)... I have the Borla Dual Round slash-angled intercooled tips... I think they fit the *** end quite nicely.

Woodyz has them (my old ones actually), and I know Ribz does too... not sure who else has them.


Geoff
95 Z26 3400 5spd
Beretta Preservation Society - Director of Acquisitions
Image

User avatar
Ribz80
Registered User
Posts: 233
Joined: Mon Apr 30, 2001 5:05 pm

Exhaust tips? Can I see some pics?

Postby Ribz80 » Tue Oct 11, 2005 1:03 am

Yes, I have had Borla tips in some form since 97.   The first time was singular Square angle tips x2 on the stock muffler.  And I have the same tips Woody has since 2001.  They do fit very well visually and still clean up as new to this day.


91' GT  SOLD
99' Saab Viggen Stg-4 315hp- in European Car Magazine  7/2006

Guest

Exhaust tips? Can I see some pics?

Postby Guest » Tue Oct 11, 2005 8:15 am

I had a Borla Dual outlet with Intercooler on my Escape. Thing must have weighed about 5 lbs. Stretched the rear rubber donut.
The Hooker only runs about $46 at Summit. But keeps getting B\O'd
Chris



User avatar
heavywoody
Global Moderator
Posts: 1848
Joined: Sun Nov 03, 2002 4:10 pm
Location: Concord, NC
Has thanked: 8 times
Been thanked: 15 times
Contact:

Exhaust tips? Can I see some pics?

Postby heavywoody » Tue Oct 11, 2005 9:19 am

OT: The words Hooker and stretched should not be used in the same paragraph.... heyooo!! :banana


Geoff
95 Z26 3400 5spd
Beretta Preservation Society - Director of Acquisitions
Image


Return to “Exhaust”

Who is online

Users browsing this forum: No registered users and 1 guest