93 Beretta missing stuff

Post information about exhaust systems. Either purchased or custom made
mike8668
Posts: 4
Joined: Wed Mar 09, 2016 10:25 am

93 Beretta missing stuff

Postby mike8668 » Wed Mar 09, 2016 10:29 am

My friend brought over her 93 Corsica to look at her exhaust... Not much to look at because muffler completely gone...
I can't find a good representation to see what the brackets are SUPPOSED to look like... Gmpartsdirect diagrams were less than helpful
Can someone supply me with a picture or link to of the front and rear muffler brackets?



User avatar
Money pit Beretta
Registered User
Posts: 6353
Joined: Thu Jul 26, 2007 11:36 am
Location: Kansas
Has thanked: 2 times
Been thanked: 8 times

Re: 93 Beretta missing stuff

Postby Money pit Beretta » Wed Mar 09, 2016 7:21 pm

Check the Walker site under replacement exhaust.


keep'em flying!

mike8668
Posts: 4
Joined: Wed Mar 09, 2016 10:25 am

Re: 93 Beretta missing stuff

Postby mike8668 » Thu Mar 10, 2016 8:35 am

Haven't had any luck there.. There list the p/n for the muffler, which i bought. Also lists the rubber donut hangers but not the hangers/brackets front and rear.. All that's left under the car is the mounting brackets on the body... The pieces of the hangers that actually bolt to muffler have been sheared off... I've seen the brackets with the rubber strap material but have no idea what else is there out how they fit together



mike8668
Posts: 4
Joined: Wed Mar 09, 2016 10:25 am

Re: 93 Beretta missing stuff

Postby mike8668 » Thu Mar 10, 2016 10:14 am

I see these hangers.. Do they just hook in rods that are supposed to be there??
Attachments
IMG_20160310_101448.jpg



User avatar
1988GTU
Registered User
Posts: 2744
Joined: Sat Mar 23, 2002 1:06 pm
Location: A town up north
Has thanked: 18 times
Been thanked: 11 times

Re: 93 Beretta missing stuff

Postby 1988GTU » Thu Mar 10, 2016 12:25 pm

No brackets are really used. It's a rubber ring attached to a steel hanger then the exhaust has a metal rod welded in place and bent to hook to the rubber.. Most places weld new steel hangers to better choice metal if the factory spot is deteriorated where it was affixed on the chassis.


_________
Image
-------------

mike8668
Posts: 4
Joined: Wed Mar 09, 2016 10:25 am

Re: 93 Beretta missing stuff

Postby mike8668 » Thu Mar 10, 2016 4:46 pm

Ahh.. OK

Welder.. Check
Various steel rod... Check
Imagination... Check

Thanks.. Will give it a shot at McGyvering



User avatar
3X00-Modified
Administrator
Posts: 10664
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: 93 Beretta missing stuff

Postby 3X00-Modified » Fri Mar 11, 2016 8:04 am

mike8668 wrote:Will give it a shot at McGyvering

Pretty much a required art to work on a Beretta.



User avatar
themixer
Registered User
Posts: 1520
Joined: Fri Aug 14, 2009 12:13 pm
Location: Truro, Nova Scotia. Canada
Has thanked: 3 times
Been thanked: 16 times

Re: 93 Beretta missing stuff

Postby themixer » Fri Mar 11, 2016 12:40 pm

Image




Return to “Exhaust”

Who is online

Users browsing this forum: No registered users and 2 guests