Page 1 of 1

new exhaust maniold for 1993 2.2L OHV

Posted: Wed Mar 08, 2017 1:40 pm
by ranausaurus
Hi,
I have found a exhaust manifold for the cavalier/beretta but for the year 1998 to 2002

http://www.ebay.com/itm/1998-2002-CHEVY ... 1015700191

Can it be use in my beretta from 1993 ? with some research I have found that the pre-96 exhaust holes was bigger than the post-96 exhaust holes but I don't know if it exactly because I don't find any specification of the diameter... :x

Re: new exhaust maniold for 1993 2.2L OHV

Posted: Thu Mar 09, 2017 10:06 am
by themixer
http://www.ebay.com/itm/Maximizer-Exhau ... Az&vxp=mtr

The s10 also had the 2.2 motor these might be what you want.

Re: new exhaust maniold for 1993 2.2L OHV

Posted: Thu Mar 09, 2017 1:11 pm
by Cliff8928
The S10 one would be no good since it's angled differently for RWD.

Re: new exhaust maniold for 1993 2.2L OHV

Posted: Thu Mar 09, 2017 1:32 pm
by ranausaurus
so it doesn't exist exhaust manifold for mine ?

Re: new exhaust maniold for 1993 2.2L OHV

Posted: Thu Mar 09, 2017 1:41 pm
by themixer
http://www.ebay.com/itm/94-02-Chevy-S10 ... 1221440341

use a turbo as a muffler? connect a couple oil feed and return lines, fab up a couple pipes into the intake, make a downpipe, convert to an aftermarket engine management system have it tuned. easy?

Re: new exhaust maniold for 1993 2.2L OHV

Posted: Fri Mar 10, 2017 1:42 pm
by ranausaurus
convert it to turbo is easy but I don't find aftermarket ECU for the 2.2L But i'm thinking about swap the stock ECU by the 1227727 from my old Buick ;)