Exhaust/muffler ideas
Exhaust/muffler ideas
im kinda in the need for a new exhaust system since my left pipe is rotted out. my idea was to do 2 1/2 from header back w/ a magnaflow high flow cat and either thrush muffler or maybe trying out the Hushpower muffler from flowmaster , new tips and keeping the dual look in the rear. i want it to have an almost V8 sound or sound like a 60's V6 with glasspacks
any ideas ?
has anyone tryed the hushpower muffler on there Rettas yet ?
here what it looks like now from the rear
any ideas ?
has anyone tryed the hushpower muffler on there Rettas yet ?
here what it looks like now from the rear
91 Beretta GT26- GT/Z26
-
- Registered User
- Posts: 1035
- Joined: Thu Feb 20, 2003 11:21 pm
- Location: South Central MN
Re: Exhaust/muffler ideas
ditch the duals please. You'll never get that sound without a good sized cam. Closest sound to that on the forums is 3XXX modified's car.
94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
Re: Exhaust/muffler ideas
it sounds really good id like it a bit louder. where/ who can i get a cam for this thru? who makes headers for the 3.1 ?? im gonna have the intake extrud honed at one point
91 Beretta GT26- GT/Z26
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: Exhaust/muffler ideas
WOT-Tech has some cams and other stuff. No headers though. How many miles do you have on this 3.1? A cam change is best on a new or rebuilt engine. If your just looking for exhaust tone I'd skip the cam. You will need to tune if the cam is too big. It's not cheap to have those crapy 3.1 manifolds done. 3400's flow much better, but have D ports. No one makes headers for our cars. Some people use Grand Am headers, but they cost alot and you have to move the fan and the coils to get them to fit. Take that with a grain of salt, because I have not put them on. They may also have D ports.
keep'em flying!
Re: Exhaust/muffler ideas
its got 112k on it . it car seems kinda slugish so maybe doing something like the cam will give me a good reason to rebuild it and do some other minor engine mods. to have the intake (both halfs) done it would o=cost me almost $1,000 not including having the top part powder coated white. a buddy of mine had a beretta and he ported and polished the heads on it, put on a flowmaster muffler and it was pretty quick and nice sounding
91 Beretta GT26- GT/Z26
- woody90gtz
- Registered User
- Posts: 4703
- Joined: Thu Jul 11, 2002 8:45 pm
- Location: Walton, NY
- Contact:
Re: Exhaust/muffler ideas
I was wondering about Hushpower muffler for mine. My straight-through Borla is ridiculously loud. WOT it sounds awesome, but the part-throttle/decel drone now is a little much.
Not to sound pessimistic, but it's almost stupid to build up a 3.1L when 3400s are so cheap & easy.
Not to sound pessimistic, but it's almost stupid to build up a 3.1L when 3400s are so cheap & easy.
91 "SS" - WOT 3400/5spd - 13.29@101.6 - World's fastest N/A FWD Beretta
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
96 "T56" LS/6spd/8.8 RWD swap - 13.45@104.7 lol
GEARHEAD dezign youtube
Re: Exhaust/muffler ideas
if i can ever get my hands on a junk Z26 id prob. do it . i also thought of gettin a 3.8 SCed motor from a Par Ave and shoe horning it in the car.
91 Beretta GT26- GT/Z26
-
- Registered User
- Posts: 1035
- Joined: Thu Feb 20, 2003 11:21 pm
- Location: South Central MN
Re: Exhaust/muffler ideas
he needs a flat tappet cam, not a roller so other companies do sell them. I just recommended the cam to get the "sound" you were looking for.
94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: Exhaust/muffler ideas
All of Ben's cams are flat tappet, but now he has some Comp Cam rollers for those of us that have the 3100(or 3400 and the 3500). I was just thought if he only wanted them for the exhaust sound there is not much of a point in doing it, that and the miles are getting kind of up there.
It has been done, the 3.8 that is, but a 3400 would go in there much more easy.
It has been done, the 3.8 that is, but a 3400 would go in there much more easy.
keep'em flying!
Re: Exhaust/muffler ideas
thats kinda what i figured. my 91 Regal has a 3.8 and id love to boost the horses on that.
91 Beretta GT26- GT/Z26
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: Exhaust/muffler ideas
I think http://www.zzperformance.com/grand_prix/index.php has a good amout of 3.8 stuff. You can get things for the 3.1 but you get more from a 3400 swap. What are your plans for the 3.1?
keep'em flying!
Re: Exhaust/muffler ideas
i know im gonna get the MRZ pulleys and maybe do the extrud hone on the intake. then do 2 1/2 exhaust . other then that not much really. i gotta get my Regal on the road before i get into doing any mojor engine work cuz i cant aford alot of down time since the retta is my only car
91 Beretta GT26- GT/Z26
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: Exhaust/muffler ideas
How much will that cost on the intakes? By the way, wicked-irocz makes some great down pipes, PM him. What do you have to do on the Regal?
keep'em flying!
Re: Exhaust/muffler ideas
body work , paint, trans, rear calipers, inspection
91 Beretta GT26- GT/Z26
- Money pit Beretta
- Registered User
- Posts: 6411
- Joined: Thu Jul 26, 2007 11:36 am
- Location: Kansas
Re: Exhaust/muffler ideas
That would take alot of funds. Check on that down pipe if you have anything left over.
keep'em flying!