Page 1 of 1

Bosal for 94 Z26?

Posted: Sun Feb 06, 2011 1:02 am
by killaj131
So i got a 94 Beretta Z26 automatic and need a new muffler as my stock muffler went out. I was planning on getting this Bosal muffler but wanted some opinion's. I don't want a ricer sounding car but something with some beast to it lol. Or let me know what you think is good. thanks!

Here is link for muffler i want any good?
http://www.andysautosport.com/chevrolet ... 75398.html

Re: Bosal for 94 Z26?

Posted: Sun Feb 06, 2011 7:51 pm
by killaj131
Or another question is if i got this muffler :
http://www.amazon.com/Dynomax-17263-Ult ... 59&sr=1-11

Would this tip fit it you think:
http://www.andysautosport.com/chevrolet ... 75443.html

Thanks guys! im just trying to figure out what to get and what fits cause im not a under the car kinda guy lol.

Re: Bosal for 94 Z26?

Posted: Mon Feb 07, 2011 8:23 pm
by Money pit Beretta
Looks like you will be the one to do all the testing on this stuff. I don't know anyone here that has a Bosal and that tip on their car.

Re: Bosal for 94 Z26?

Posted: Mon Feb 07, 2011 9:37 pm
by killaj131
I was going to get that but i went with the Flowmast Delta 40 insted cause I know how that sounds. I was reading around and read that the bosal thing was just like a stock sounding muffler so it was not what i was lookin for.

Re: Bosal for 94 Z26?

Posted: Tue Feb 08, 2011 8:47 am
by Kris GTwhat?
the vdub guys loove the bosal stuff. two locals to me have it on their cars and they sound pretty awesome. of course it wont sound anything like our cars, but i know its good stuff

Re: Bosal for 94 Z26?

Posted: Tue Feb 08, 2011 9:02 am
by Money pit Beretta
My Flowmaster had a good sound......a bit too loud for me now. The Magnaflow that I have on my 95 is ok, but doesn't sound the way I'd like it to.
Let me put it this way: My GF would always be at the door went I went to pick her up with the Flowmaster. Now I have to go to the door and ring the doorbell. Also if you haven't read some of my other posts the Flowmaster rusted out too quick(two years tops). Really I think you will like the Flowmaster's sound over anything else. I had just a pipe and no tip because they can make a raspy sound. Although a tip in the shape of a "V" can help pull the exhaust out(do to sound waves and pressure waves going into the atmosphere). But the cat may break down the pressure wave to a point where there is little to no gain. My exhaust book didn't cover systems with cats.

Re: Bosal for 94 Z26?

Posted: Tue Feb 08, 2011 4:12 pm
by killaj131
I plan on getting this dual tip from pacesetter it's about the only tip I like cause it is dual and could not find nething better or cheaper that fits.
http://www.amazon.com/Setter-95-9904-MO ... 284&sr=8-1

Re: Bosal for 94 Z26?

Posted: Tue Feb 08, 2011 7:02 pm
by Money pit Beretta
Looked it up online and the sound wave is reflected by the cat. Enjoy your tip.

Re: Bosal for 94 Z26?

Posted: Wed Feb 09, 2011 3:53 pm
by killaj131
So thats bad lol? sorry I don't know much about car and what is good or bad. What kinda tip do you recommend?

Re: Bosal for 94 Z26?

Posted: Wed Feb 09, 2011 8:54 pm
by Money pit Beretta
No man it's what ever you want. It's just for looks.

Re: Bosal for 94 Z26?

Posted: Wed Feb 09, 2011 11:46 pm
by Reptile_ZX
The thing I don't like about those Pacesetter tips is the yellow paint on the inside. I've heard they burn out pretty quickly and sound really raspy after that too, you might want to check out some reviews on them before buying. I haven't head good things about Pacesetter.

Re: Bosal for 94 Z26?

Posted: Thu Feb 10, 2011 1:09 am
by killaj131
What kind of tip would you recommend?

Re: Bosal for 94 Z26?

Posted: Thu Feb 10, 2011 1:03 pm
by wicked-irocz
I would also recomend not getting pacesetter tips unless you get completely SS ones and I'm not sure if thats even available.

Re: Bosal for 94 Z26?

Posted: Fri Feb 11, 2011 12:27 am
by Reptile_ZX
killaj131 wrote:What kind of tip would you recommend?
I would just go with something like these:

http://www.summitracing.com/parts/BIG-59905FLT/

http://www.summitracing.com/parts/HED-17104/