Page 1 of 1

Quad 4 Exhaust shield

Posted: Sun Jun 05, 2011 6:11 pm
by Travelor
Anyone have a part number for this on Rock Auto? I see nothing listed.

I grow tired of the vibrating orchestra that is my cover.

Re: Quad 4 Exhaust shield

Posted: Sun Jun 05, 2011 7:39 pm
by uncle
Not available any where.

Re: Quad 4 Exhaust shield

Posted: Mon Jun 06, 2011 7:09 pm
by mickaz
use manifold wrap instead.

Re: Quad 4 Exhaust shield

Posted: Thu Jun 09, 2011 11:01 pm
by 90GTZHO
Hell, i havent had mine installed since i bought the car. I never see any issues with it either. Of course, i do have those hood heat extractors installed too lol

Re: Quad 4 Exhaust shield

Posted: Fri Jun 10, 2011 12:45 am
by SuzukiGhostRider
I had left mine off when I just finished my top end rebuild. Mostly because I'm a lazy bastard sometimes and didn't want to make the umpteenth trip to the parts store (of course, I COULD have had them delivered, had I KNOWN the size and twist) for MORE parts for the bitch.

But after a few days, I could tell the heat difference without the heat shield, so I re-installed it. It's a good thing to have installed. IMO.

Re: Quad 4 Exhaust shield

Posted: Fri Jun 10, 2011 1:25 am
by Travelor
Well without it installed you will start baking your power steering rack, and stuff back there will melt. Its there for a reason. I thought about wraps, but there isn't much to wrap back there. Its not a V8.

Looks like I'll have to search the yard, and maybe see if a metal shop can't fab me up a new one.

Re: Quad 4 Exhaust shield

Posted: Fri Jun 10, 2011 1:30 am
by Chad91GTZ
Some of the twin cams came with a kevlar type relective fabric that wrapped around the rack, I run both. Rack stays nice and cool.

Re: Quad 4 Exhaust shield

Posted: Mon Jul 04, 2011 4:47 pm
by 90GTZHO
Pat, something else you can look at is the bolts holding it down. Are they getting worn and loose as well? If so you can just pull the manifold, re-tap the holes with new bolts and put it back on. Should solve your problem :) If thats not gonna work, send me a PM, theres about 3 in the yards here where i am.

Re: Quad 4 Exhaust shield

Posted: Tue Jun 11, 2013 7:43 pm
by woody90gtz
Nobody has pics? haha

Re: Quad 4 Exhaust shield

Posted: Sat Jul 06, 2013 5:25 pm
by Alpinestar10
Dunno if you ever got pics eric but i got shawn one and can post pics if you want. Its basically fabric that wraps around the center of the rack no need for any bolts or anything

Re: Quad 4 Exhaust shield

Posted: Mon Sep 16, 2013 10:30 pm
by Godlike
Ive been running w/o a heat sheild for some time now. Vibrations broke holes out of the sheild around the bolts of my origional one.
My GTZ Z26 and the twincam all have ps heat wraps on them scavanged off of Grandams and the yard though which seem to be enough.

Re: Quad 4 Exhaust shield

Posted: Mon Sep 16, 2013 10:57 pm
by woody90gtz
Yeah Brad, Cack hooked me up with one. And for the sake of pics in this thread...here it is:

Image
Image

Re: Quad 4 Exhaust shield

Posted: Mon Sep 23, 2013 6:28 pm
by Godlike
Ya they work well and they look proper.
I have also scavanged small sleeves off other cars to sheild the shift cables and what not

Re: Quad 4 Exhaust shield

Posted: Sun Sep 29, 2013 1:06 am
by Cliff8928
If i remember right, DEI makes a perfect size heat wrap for the shift cables.. I have the other half of the of the piece from the TwinCam on my GT.

Re: Quad 4 Exhaust shield

Posted: Sun Sep 29, 2013 5:25 pm
by woody90gtz
I put the DEI wrap on my shift cables...was able to fit both cables in one sleeve.