Exhaust/fan question
Exhaust/fan question
I just installed my headers but I find the exhaust has quieted down too much, almost no raspiness, I wanna add some, it was suggested to me to remove the resonator and this should increase it, does anyone know if this is in fact the case? Also, I need to go with a thin fan, so was wondering if anyone has any suggestions as my stock 95 one will not fit. Thanks.
BMAN
Re: Exhaust/fan question
I put a resonator on my Honda to get rid of the rasp, so take yours off and you should get back some of that noise you want.
Re: Exhaust/fan question
defiantly remove the resonator.. its a huge restrictive part. i removed mine on stock engine and it made a noticeable difference in throttle response and sound. you will gain alot more power not having it there.
i have aftermarket cat no resonator and 2 1/4 exhaust to the rear axle, i never got around to completing it all the way, made a huge difference in throttle response with manifold and stock engine.
i have aftermarket cat no resonator and 2 1/4 exhaust to the rear axle, i never got around to completing it all the way, made a huge difference in throttle response with manifold and stock engine.
Re: Exhaust/fan question
I'm looking at the Flexalite F21133 fan, slim, and pushed 1250 cfm, what does a stock fan push?
BMAN
Re: Exhaust/fan question
Just wondering if anyone can help me out, this is the fan I am looking at getting.
http://www.drivewire.com/search/?N=0&sv ... ersal:0%29
http://www.drivewire.com/search/?N=0&sv ... ersal:0%29
BMAN
-
- Registered User
- Posts: 1035
- Joined: Thu Feb 20, 2003 11:21 pm
- Location: South Central MN
Re: Exhaust/fan question
other than the header, what do you have for the rest of your exhaust?
94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
-
- Registered User
- Posts: 535
- Joined: Fri Oct 29, 2010 8:52 am
Re: Exhaust/fan question
If you want the car to run cooler try a 180 thermostat.It's so much cheaper and works great.My flowmaster is raspy but i hate it.Kinda sounds nice when your decelerating=)
- 3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: Exhaust/fan question
Its more of a fitment issue than cooling issue I would think... and I'm guessing he was asking CFM to ensure he's matching or doing better than the stock fan and not under-sizing it.
-
- Registered User
- Posts: 535
- Joined: Fri Oct 29, 2010 8:52 am
Re: Exhaust/fan question
Well i don't see the point in spending 2 hundred on a single fan.3X00-Modified wrote:Its more of a fitment issue than cooling issue I would think... and I'm guessing he was asking CFM to ensure he's matching or doing better than the stock fan and not under-sizing it.
You can pull a dual fan from a 95 grand prix and i believe it slimmer.
If i remember correct.Or take the blocks that hold the fan and just use a washer like i did=)
-
- Registered User
- Posts: 1035
- Joined: Thu Feb 20, 2003 11:21 pm
- Location: South Central MN
Re: Exhaust/fan question
What is the diameter of your tubing before and after the Y?
You must have already removed the resonator as you didn't post that you had one. Just an FYI, resonators pretty much never lose power.
You must have already removed the resonator as you didn't post that you had one. Just an FYI, resonators pretty much never lose power.
94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
-
- Registered User
- Posts: 535
- Joined: Fri Oct 29, 2010 8:52 am
Re: Exhaust/fan question
Just wondering dusty if you could make an SS cat back exhaust for my 89??
It has the metal gas tank.Sorry to get off topic marc=)
It has the metal gas tank.Sorry to get off topic marc=)
-
- Registered User
- Posts: 1035
- Joined: Thu Feb 20, 2003 11:21 pm
- Location: South Central MN
Re: Exhaust/fan question
I'll get back to you on FB.
94 Beretta Z26 57,4xx miles
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo
3100, auto, crank windows, power locks/trunk, A/C,
To many mods to list
-intercooler
Among beretta boards
1st Turbo 4t60-e
1st Turbo 3100
1st Turbo Z26
1st 94+ Turbo