Hub Adapters

[Decipha]

I need some adapters to mount my rims on my beretta
the rims came off a 97 cutlass with a 5x115 spacing
the beretta has a 5x100, can some one tell me where
i can get this adapters at a reasonable price? TIA

[MAJ28]

I don't know, but let me warn you - I've heard they're pretty bad for wheel bearings.

»Jason

[Asylum]

They are VERY bad for wheel bearings, and your car will look ridiculous with the wheels sticking out so far.
Besides, I'm not even sure they exist.

[1988GTU]

They can be had fir a nice penny and lotsa searching.

[yellow3800]

all above true.  My bolt pattern is now 5x115.  I highly recommend not using 5x115 pattern and just getting a diff. wheel.  Otherwise, I recommend changing the bearings to the 5x115.  They'll fit right in.  Take the bearings from the [cutlass was it?] donor car.

I took the bearing change when my powertrain changed.  Then Iwas stuck with 5x100 in back, so disk brake mod gave me matching 5x115 pattern.

my .02

[cramez]

Berettas have a pretty high negative offset in the first place, so with anything sticking out you'll never find wheels that fit like they should.  

I'd say find a 5x100 wheel or swap over to 5x115 hubs, as stated above.