polished look gtz wheels?
polished look gtz wheels?
i noticed what i think looks pretty cool is a few people on cardomain had taken some not all of the paint off their gtz wheels and i think it would look pretty sharp if i had it done to mine how did they do it heres the pic of the car i seen its sweet http://www.cardomain.com/memberpage/494899 there ya go thanks guys !
polished look gtz wheels?
Hey!! I don't know how they did it but your wheels would look great that way. I would say go for it!!
- Racing_Rush
- Registered User
- Posts: 63
- Joined: Tue Jan 18, 2005 11:49 pm
- Location: Edmonton, Alberta, Canada
- Contact:
polished look gtz wheels?
Yeah that looks really sweet and its something I would do if I had GTZ wheels.... Its would be pretty easy to do, all that you do is:
Strip all the paint off your wheels with maybe a chemical stripper -Caution this stuff is really harmful, so wear heady duty gloves when using this stuff-
Then clean all the little bits off with a scraper and reapply the stripper to parts that werent stripped. After all the paint is off just wash the wheels down really well cause you don't want any acid on the rims. Then you take some like 120 grit sandpaper and go to town sanding down the whole rim to remove any inperfections in the rims.
Then go progessively finer and finer ie. 120- 200- 400- 1000- 1500- 2000. then you can tape off the "polished sections" and after cleaning the rim well with some wax remover you can prime the rim. Then paint.
Then remove all the tape and use a good aluminum polish to polish the face of the wheel. After you get everything just right clearcoat the wheel like 5 times.
Strip all the paint off your wheels with maybe a chemical stripper -Caution this stuff is really harmful, so wear heady duty gloves when using this stuff-
Then clean all the little bits off with a scraper and reapply the stripper to parts that werent stripped. After all the paint is off just wash the wheels down really well cause you don't want any acid on the rims. Then you take some like 120 grit sandpaper and go to town sanding down the whole rim to remove any inperfections in the rims.
Then go progessively finer and finer ie. 120- 200- 400- 1000- 1500- 2000. then you can tape off the "polished sections" and after cleaning the rim well with some wax remover you can prime the rim. Then paint.
Then remove all the tape and use a good aluminum polish to polish the face of the wheel. After you get everything just right clearcoat the wheel like 5 times.
1991 Cavalier Z24- Racing seats, MSD wires, relocated MSD coils, 2.5" exhaust, ported exhaust manifolds, high volume oil pump, poly grafite front end, 92+ brake upgrade, drilled and slotted rotors, 1.5" lowering, 17" Klasse wheels...
Future Plans: 18's, paint, rear discs, more horsepower...
Future Plans: 18's, paint, rear discs, more horsepower...
polished look gtz wheels?
Tom-Acid Burn I think that is his screen name here an bstuff has his gtz rims like that, but he bought them from a beretta in the jy, they do look nice though!
-
- Registered User
- Posts: 85
- Joined: Mon Aug 30, 2004 1:15 am
- Location: Camrose, Alberta/NS
- Contact:
polished look gtz wheels?
Quite a few people's done it, and they look hot...I currently have two sets of gtz rims done like this....
heres the best pic I could find of my black set...
and here's a link of my other set(sorry they werent polished good in these pics...). If done good they look really blingy and sweet
clicky...
heres the best pic I could find of my black set...
and here's a link of my other set(sorry they werent polished good in these pics...). If done good they look really blingy and sweet
clicky...
93 gt-diza blitz kit,17's,3400/5speed...F'in A
90 gtz-rebuilt quad,17's,fx hood/kit,91+ dash swap
90 gtz-new crate motor,med grey dash swap
-
- Registered User
- Posts: 85
- Joined: Mon Aug 30, 2004 1:15 am
- Location: Camrose, Alberta/NS
- Contact:
polished look gtz wheels?
pretty much the same as posted above...if you use paint stripper, the surface will be very rough to start with, so in my opinion, it's easier to just start sanding the paint off it...the only thing with this is it might leave some paint on the rim in the little inperfections-this is a ##### to clean and get rid of...
By yeah, just sand the hell out of them, then keep going finer...once you get a smooth, fairly polished(probably will look more like brushed aluminium at this stage) surface, start polishing them...I used a polishing wheel with a block of polish, but you can use a "rubbing compound" style...
All in all, the best results will take more work..the finer you sand, and the more you polish, the better they look in the end...I put probably around 10 or more hours into each rim with sanding polishing,etc....
Also, be very careful around the edges...taping up all the edges is a good idea too....
By yeah, just sand the hell out of them, then keep going finer...once you get a smooth, fairly polished(probably will look more like brushed aluminium at this stage) surface, start polishing them...I used a polishing wheel with a block of polish, but you can use a "rubbing compound" style...
All in all, the best results will take more work..the finer you sand, and the more you polish, the better they look in the end...I put probably around 10 or more hours into each rim with sanding polishing,etc....
Also, be very careful around the edges...taping up all the edges is a good idea too....
93 gt-diza blitz kit,17's,3400/5speed...F'in A
90 gtz-rebuilt quad,17's,fx hood/kit,91+ dash swap
90 gtz-new crate motor,med grey dash swap
polished look gtz wheels?
damn guys they look pretty sweet! wow 10 hours on each wheel but also one thing i noticed on that guys wheels he made his own aluminum center caps which really set those wheels off and thanks for the feedback guys if there are any more ideas feel free to help me brainstorm some more!
- Racing_Rush
- Registered User
- Posts: 63
- Joined: Tue Jan 18, 2005 11:49 pm
- Location: Edmonton, Alberta, Canada
- Contact:
polished look gtz wheels?
That sounds awsome you gotta get some pictures up.
1991 Cavalier Z24- Racing seats, MSD wires, relocated MSD coils, 2.5" exhaust, ported exhaust manifolds, high volume oil pump, poly grafite front end, 92+ brake upgrade, drilled and slotted rotors, 1.5" lowering, 17" Klasse wheels...
Future Plans: 18's, paint, rear discs, more horsepower...
Future Plans: 18's, paint, rear discs, more horsepower...
polished look gtz wheels?
I have a pic of my gtz on members rides but no mods yet ill get there though
polished look gtz wheels?
Don`t U.S version Berettas come with a chassis rust protection coating? My euro spec gtz is completely black underneath, they come like that in Europe.
-
- Registered User
- Posts: 280
- Joined: Thu Jun 28, 2001 8:55 pm
- Location: Hillsdale Michigan
- Contact:
polished look gtz wheels?
(Andrew @ Aug. 19 2005,12:20)Q
U
O
T
EDon`t U.S version Berettas come with a chassis rust protection coating? My euro spec gtz is completely black underneath, they come like that in Europe.
Neither of mine came with factory undercoating. They both had a bare undercarriage with factory paint on the floor pans.
U
O
T
EDon`t U.S version Berettas come with a chassis rust protection coating? My euro spec gtz is completely black underneath, they come like that in Europe.
Neither of mine came with factory undercoating. They both had a bare undercarriage with factory paint on the floor pans.
'92 GT-Z 3.1L 5spd lot's of GO FAST stuff
polished look gtz wheels?
I wouldnt do it. You're talking about those crosslaces right?
It would take too much time to polish them. Unless you're going for just the lip.
It would take too much time to polish them. Unless you're going for just the lip.
_________
-------------
-------------
polished look gtz wheels?
yeah those wheels 88gtu...what i was going to do was polish the lip and have a polised center cap made and have the wheel itself sprayed black..