95 3100 Starting/acceleration problems
Re: 95 3100 Starting/acceleration problems
Thank you but I don't need pictures I have extra pumps laying around.
I was just explaining why you might have 20 psi as opposed to the pump failing
all together.
I was just explaining why you might have 20 psi as opposed to the pump failing
all together.
-
3X00-Modified
- Administrator
- Posts: 10912
- Joined: Thu Jul 05, 2007 9:18 am
- Location: Brooklyn CT
Re: 95 3100 Starting/acceleration problems
I have a stock pump at home I can tear apart but I don't believe they are considered "two stage" You don't normally see that as a spec when you buy them, including the Walbro HP pumps.
-
Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Re: 95 3100 Starting/acceleration problems
So just got to the garage. Gonna try replacing the filter first and see if my pressure changes.
- Attachments
-
- Fuel pressure the same with and without the fuel reg. Vacuum plugged in.
-
Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Re: 95 3100 Starting/acceleration problems
Well ran into a few problems. Glad I got those straps. This time the pump won't fit right. The space between the connection and the tube are different. Great! Thanks Napa. I managed to get it to work. Going back in after I cut out a strap bolt that broke...
- Attachments
-
-
Luckymc420
- Registered User
- Posts: 489
- Joined: Mon Jul 10, 2006 1:31 pm
- Location: Des Moines, Iowa
Re: 95 3100 Starting/acceleration problems
Looks good and runs nice. Going for a test drive. Thanks for the info and help. Made the pump change a lot eaiser.
- Attachments
-