Page 1 of 1
1995 Beretta z26 or base wire diagram for gauge cluster
Posted: Sat Apr 30, 2016 7:42 pm
by jjanke
How can I tell what pins on the cluster control what functions. ...?????...
Re: 1995 Beretta z26 or base wire diagram for gauge cluster
Posted: Sun May 01, 2016 11:26 am
by ifixalot
this is from a 1996 service manual, I hope it helps.
Re: 1995 Beretta z26 or base wire diagram for gauge cluster
Posted: Mon May 02, 2016 9:20 am
by 3X00-Modified
You need a 95... They may actually be the same, I forgot that a 96 the main change was the way the Tach signal was fed... 94-95 was from the ICM, 96 was an ECU output so the clusters are different. Not sure if the pin designation changed though.
Re: 1995 Beretta z26 or base wire diagram for gauge cluster
Posted: Mon May 02, 2016 6:08 pm
by jjanke
This may help !!! I'm trying to figure out if I can use the dash and cluster from my Beretta but as some of u may know I'm using the Camaro z28 wire harness.....sounds wierd but ......I either need to fit the Camaro dash and cluster in with no wire modifying or use the Beretta dash and cluster with wire mod. Or the Beretta dash with Camaro cluster. Or scrap it all and bent aluminum dash and pod gauges..... I know this may sound confusing...... Please refer to the z28 Beretta posts for the rest of the stoty
Re: 1995 Beretta z26 or base wire diagram for gauge cluster
Posted: Mon May 02, 2016 7:01 pm
by 1988GTU
beretta dash with f-body IP.
Re: 1995 Beretta z26 or base wire diagram for gauge cluster
Posted: Fri May 06, 2016 9:21 pm
by jjanke
yeah ..... the Camaro cluster is just a lil too wide.....it could be persuaded in the beretta dash though...
Re: 1995 Beretta z26 or base wire diagram for gauge cluster
Posted: Fri May 06, 2016 10:23 pm
by 1988GTU
go retro with a different year/style f-bod (92) IP using a corsica (88) dash?