a/c issues in 90 GTZ
a/c issues in 90 GTZ
I am trying to get my a/c compressor to kick on in my 90GTZ. I have already evacuated, oiled and attempted to start the system. However, has anyone ever noticed that Quad 4's with the older a/c system do not have a low pressure switch? I am going to try to jump the compressor tomorrow. It is not getting power. The cooling fan IS turning on properly. Otherwise narrow my problem down to a HIGH pressure switch. There are 3 wires going to that. The circuit is supposed to be closed.
Any ideas? I am using my 91 service manual as my 90 is missing section 1.
I also noticed that 90 has 4 relays at the cowl mounting and 91 has 3 for Q4.
Any ideas? I am using my 91 service manual as my 90 is missing section 1.
I also noticed that 90 has 4 relays at the cowl mounting and 91 has 3 for Q4.
1990 Beretta GTZ 1995 Beretta Z26 1996 Beretta Z26
-
- Registered User
- Posts: 186
- Joined: Fri Feb 18, 2011 11:16 pm
- Location: St. Paul Mn
- Contact:
Re: a/c issues in 90 GTZ
If its oiled but the system is vac'd the compressor wont come on untill there is refrigerant in the system.
Re: a/c issues in 90 GTZ
I added r134. There is pressure in the system.BerettaMN wrote:If its oiled but the system is vac'd the compressor wont come on untill there is refrigerant in the system.
1990 Beretta GTZ 1995 Beretta Z26 1996 Beretta Z26
Re: a/c issues in 90 GTZ
One of the relays is for the A/C clutch. I think its the second one from the left.