Page 3 of 3
Attention all tuners! Doing some OBD1.5 tuning, any tips?
Posted: Sat Apr 26, 2014 9:42 pm
by whiteretta
Yes. I checked the .bin files that were posted for the 1.5 tuning and they all have the 100% TPS matching the 93.8%.
Re: Attention all tuners! Doing some OBD1.5 tuning, any tips
Posted: Mon Apr 28, 2014 11:18 am
by 3X00-Modified
none of those tables will change anything either because shift speed is not controlled by the ECU on the 4t60e...
Attention all tuners! Doing some OBD1.5 tuning, any tips?
Posted: Thu May 01, 2014 9:34 am
by whiteretta
They definitely changed the shift speeds, had to take them back to the original numbers though! I switched these tables to a pre made bin file setup, and the shifts were way too early for me.
Re: Attention all tuners! Doing some OBD1.5 tuning, any tips
Posted: Thu May 01, 2014 10:44 am
by 3X00-Modified
You also changed your vacuum modulator which is what directly controls the shift speeds due to line pressure... But I'm punching out of this thread.
Attention all tuners! Doing some OBD1.5 tuning, any tips?
Posted: Thu May 01, 2014 1:01 pm
by whiteretta
By shift speeds I mean the mph when the vehicle shifts, not the delay between shifting gears. I should have clarified this better.
I know I keep being told to go out and buy another tuner program or indirectly being told to do an OBD swap, but that's not an option right now.
Re: Attention all tuners! Doing some OBD1.5 tuning, any tips
Posted: Thu May 01, 2014 1:04 pm
by RobertISaar
tunerpro = free(donation encouraged).
the XDF i created = free.
Re: Attention all tuners! Doing some OBD1.5 tuning, any tips
Posted: Thu May 01, 2014 2:55 pm
by 3X00-Modified
Exactly... GET tuner Pro and Roberts XDF, I think you'll be much happier... You have the hardware necessary to program and that's the core... Use something else to mod the file.
Attention all tuners! Doing some OBD1.5 tuning, any tips?
Posted: Thu May 01, 2014 10:09 pm
by whiteretta
I never knew TunerPro was free... or that it worked on a '94...
-_-
I just downloaded it, lol.
Re: Attention all tuners! Doing some OBD1.5 tuning, any tips
Posted: Fri May 02, 2014 8:53 am
by 3X00-Modified
Robert told you way back in the beginning!!! lol
RobertISaar wrote:inside of tunercat, no. requires TDFs.
would have to use it with tunerpro(not that i see any downsides to it).
Re: Attention all tuners! Doing some OBD1.5 tuning, any tips
Posted: Fri May 02, 2014 10:54 am
by whiteretta
Okay, at that point I discovered it would work, but I still didn't know it was free! Haha
Now about that XDF file... lol. I searched the site here and 60degreeV6, but I wasn't positive if I had found the correct file or not.
Re: Attention all tuners! Doing some OBD1.5 tuning, any tips
Posted: Fri May 02, 2014 11:01 am
by RobertISaar
http://www.gearhead-efi.com/Fuel-Inject ... ion-P66-V6
that has my most recent XDF. 60V6 still isn't allowing files to be uploaded into the downloads section.
Re: Attention all tuners! Doing some OBD1.5 tuning, any tips
Posted: Fri May 02, 2014 11:37 am
by whiteretta
Woo! Thankyou! Now for the progress to begin!