Good .bin file for VE?

Want to know how to get more out of your Beretta? Or have a mod you would like to share?
User avatar
whiteretta
Registered User
Posts: 586
Joined: Mon Jan 31, 2011 2:40 pm
Location: Troy, Ohio
Been thanked: 2 times
Contact:

Good .bin file for VE?

Postby whiteretta » Sun Jul 27, 2014 12:31 pm

I've come to the realization that I'm not good at adjusting the VE in my car's PCM... so...

Who has a .bin file with a better than factory setup, something that I can test out with my setup? Or if somebody wants, I can send my .bin to them and let them toy around with it, improve it's weak spots.

1994 with a 3400, mild cam with .480 lift, 65mm TB, headers... 4T60E... OBD 1.5 with TunerPro. All I can't seem to set correctly is the VE.

Gracias in advance!


No cool signature because Photobucket is a bucket full of douches.
1994 Chevy Beretta, mild 3500 swap.

User avatar
woody90gtz
Registered User
Posts: 4032
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Has thanked: 4 times
Been thanked: 7 times
Contact:

Re: Good .bin file for VE?

Postby woody90gtz » Sun Jul 27, 2014 4:20 pm

Are you using TunerPro v5? If so, set up a historygram. When I started doing that it made VE tuning a lot easier. It will automatically average your BLMs in each cell.


Image
91 "SS" 3400/5spd - EP, FFP, TCE, SPEC, DSS, S&S, OBD1, 13s? GEARHEAD dezign

User avatar
woody90gtz
Registered User
Posts: 4032
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Has thanked: 4 times
Been thanked: 7 times
Contact:

Re: Good .bin file for VE?

Postby woody90gtz » Sun Jul 27, 2014 4:23 pm



Image
91 "SS" 3400/5spd - EP, FFP, TCE, SPEC, DSS, S&S, OBD1, 13s? GEARHEAD dezign

User avatar
3X00-Modified
Administrator
Posts: 10657
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Good .bin file for VE?

Postby 3X00-Modified » Sun Jul 27, 2014 5:52 pm

The VE is the main part of the tune too so you gotta get that right.



User avatar
whiteretta
Registered User
Posts: 586
Joined: Mon Jan 31, 2011 2:40 pm
Location: Troy, Ohio
Been thanked: 2 times
Contact:

Re: Good .bin file for VE?

Postby whiteretta » Sun Jul 27, 2014 10:19 pm

Yep, I have 5, I'll check it out and see what I can do with historygram.


No cool signature because Photobucket is a bucket full of douches.
1994 Chevy Beretta, mild 3500 swap.

User avatar
woody90gtz
Registered User
Posts: 4032
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Has thanked: 4 times
Been thanked: 7 times
Contact:

Re: Good .bin file for VE?

Postby woody90gtz » Sun Jul 27, 2014 11:44 pm



Image
91 "SS" 3400/5spd - EP, FFP, TCE, SPEC, DSS, S&S, OBD1, 13s? GEARHEAD dezign

User avatar
weba
Registered User
Posts: 1073
Joined: Fri Oct 14, 2005 5:34 am
Location: Helsinki, Finland.
Has thanked: 1 time
Been thanked: 2 times
Contact:

Re: Good .bin file for VE?

Postby weba » Mon Jul 28, 2014 1:23 am

Didn't know that, thanks.



User avatar
3X00-Modified
Administrator
Posts: 10657
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Good .bin file for VE?

Postby 3X00-Modified » Mon Jul 28, 2014 9:25 am

With OBDII I have a program that one of the old DHP members made. It's called the table modifier, you make a log of requested pids and load the current VE, OR MAF table, it does both, and the log you just took and it will allow you to modify the table according to parameters you specify and it will output the results ready to import. Definitely helps like I would assume this does.



User avatar
whiteretta
Registered User
Posts: 586
Joined: Mon Jan 31, 2011 2:40 pm
Location: Troy, Ohio
Been thanked: 2 times
Contact:

Re: Good .bin file for VE?

Postby whiteretta » Mon Jul 28, 2014 11:47 am

I do still have the table modifier, seems like it'll make a lot more sense with using TunerPro as compared to TunerCat. And thanks for that link Woody, that should help quite a bit!


No cool signature because Photobucket is a bucket full of douches.
1994 Chevy Beretta, mild 3500 swap.

User avatar
3X00-Modified
Administrator
Posts: 10657
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Good .bin file for VE?

Postby 3X00-Modified » Mon Jul 28, 2014 12:12 pm

Table modifier may not work seeing how your working with BLM's or does the OBDI.5 log long term fuel trim in percentage?



User avatar
whiteretta
Registered User
Posts: 586
Joined: Mon Jan 31, 2011 2:40 pm
Location: Troy, Ohio
Been thanked: 2 times
Contact:

Re: Good .bin file for VE?

Postby whiteretta » Tue Jul 29, 2014 12:35 pm

Doesn't appear so. I can't find it with any of the parameters in TunerPro...


No cool signature because Photobucket is a bucket full of douches.
1994 Chevy Beretta, mild 3500 swap.

User avatar
woody90gtz
Registered User
Posts: 4032
Joined: Thu Jul 11, 2002 8:45 pm
Location: Walton, NY
Has thanked: 4 times
Been thanked: 7 times
Contact:

Re: Good .bin file for VE?

Postby woody90gtz » Tue Jul 29, 2014 5:25 pm

OBD1 is +/- 128 for the BLM. Not sure about 1.5.


Image
91 "SS" 3400/5spd - EP, FFP, TCE, SPEC, DSS, S&S, OBD1, 13s? GEARHEAD dezign

RobertISaar
Registered User
Posts: 98
Joined: Tue Nov 27, 2012 7:14 pm

Re: Good .bin file for VE?

Postby RobertISaar » Thu Jul 31, 2014 7:09 pm

.................. there is no 1.5, not for any 3100 powered vehicle.

BLM and INT can be setup to display the way OBD2 LTFT and STFT are, it's actually fairly simple at that.



User avatar
3X00-Modified
Administrator
Posts: 10657
Joined: Thu Jul 05, 2007 9:18 am
Location: Plainfield CT
Has thanked: 12 times
Been thanked: 46 times

Re: Good .bin file for VE?

Postby 3X00-Modified » Fri Aug 01, 2014 8:08 am

We are calling it OBDI.5 because it's a non removable chip and uses the flashing method like OBDII but it's still OBDI code. Yeah I know it's not RIGHT :)



User avatar
1988GTU
Registered User
Posts: 2744
Joined: Sat Mar 23, 2002 1:06 pm
Location: A town up north
Has thanked: 18 times
Been thanked: 11 times

Re: Good .bin file for VE?

Postby 1988GTU » Fri Aug 01, 2014 2:32 pm

It's obd2 minus a 1/2 :D


_________
Image
-------------


Return to “Performance Mods”

Who is online

Users browsing this forum: No registered users and 6 guests